# Start of navigation data from: icnavsquadrons.xml
<1><Informatiecentrum Home><icmain.htm>
<2><Werken met het Informatiecentrum><icfaq.htm>
<2><Overzicht van onderwerpen><icoverview.htm>
<2><Overzicht van pSeries-documenten in het Informatiecentrum><icpserieslist.htm>
<2><Afdrukbare PDF's><icpdflist.htm>
<2><Nieuwe items in het Informatiecentrum><icupdates.htm>
<2><Site-overzicht><icsitemap.htm>
<1><Planning><iphadkickoff.htm>
# Start of navigation data from: iphaf/iphaftoc.xml
<1><Eerste installatie van de server><iphaf/iphafisskickoff.htm>
<2><Nieuw><iphaf/whatsnew.htm>
<2><Afdrukbare PDF's><iphaf/iphafprintpdfs.htm>
<2><Een aangepaste controlelijst voor de installatie maken><iphaf/issintwelcome.htm>
<2><Vooraf gedefinieerde controlelijsten voor  de installatie gebruiken><iphaf/iphafpredefined.htm>
<2><Overige informatie><iphaf/iphafrelatedinfo.htm>
# End of navigation data from: iphaf/iphaftoc.xml
# Start of navigation data from: iphbj/iphbjtoc.xml
<1><De server migreren of upgraden><iphbj/kickoff.htm>
<2><iSeries-servers><iphbj/iserieskickoff.htm>
# Start of navigation data from: iphbg/iphbgtoc.xml
<3><Upgrades><iphbg/iphbgkickoff.htm>
<4><Nieuwe functies><iphbg/whatnew.htm>
<4><Afdrukbare PDF's><iphbg/hdrprint.htm>
<4><Concepten voor het aanbrengen van upgrades><iphbg/hdrconcepts.htm>
<5><Terminologie voor upgrades><iphbg/rzamdupgradeterms.htm>
<5><Upgradepaden><iphbg/hdrpaths.htm>
<5><Tijdschema voor upgrades><iphbg/hdrconcept.htm>
<4><Controlelijst voor upgrade><iphbg/checklist.htm>
<4><De controlelijst voor de upgrade aanpassen><iphbg/iphbgintwelcome.htm>
<4><Server upgraden><iphbg/hdrupgradesteps.htm>
<5><Planningstaken voor upgrade><iphbg/planningtasks.htm>
<5><Besteltaken><iphbg/ordertasks.htm>
<6><Bestelling samenstellen><iphbg/configorder.htm>
<6><Uw bestelling valideren><iphbg/validateorder.htm>
<6><Het projectplan voor de upgrade controleren><iphbg/validateprojectp.htm>
<6><Uw bestelling plaatsen><iphbg/placeorder.htm>
<5><Voorbereidingstaken><iphbg/preparationtasks.htm>
<6><Het upgradeschema bevestigen><iphbg/confirmschedule.htm>
<6><Uw omgeving voorbereiden><iphbg/prepareenvironment.htm>
<7><Hardwarevoorziening toevoegen, vervangen of verwijderen><iphbg/addreplacehdwfeature.htm>
<8><Upgrade voor voorziening voorbereiden><iphbg/hdrprocinst.htm>
<8><Upgrade voor voorziening uitvoeren><iphbg/hdrfeatureupgradedonelpar.htm>
<8><Resources beheren><iphbg/hdrresourcemgmtlpar.htm>
<7><Inactieve resources activeren><iphbg/hdrswupgrade.htm>
<7><Uitbreidingseenheden van een gepartitioneerde server converteren><iphbg/rzamdexpanupgradelpar.htm>
<8><Conversiepaden voor uitbreidingseenheden en de overwegingen><iphbg/exunitpathscon.htm>
<8><Voorbereidingen voor de conversie van de uitbreidingseenheid><iphbg/rzamdprepexpanupgradelpar.htm>
<9><Nieuwe volgorde instellen voor SPCN-adressering><iphbg/rzamdexpanupgradelparspcn.htm>
<9><Configuratie voor de conversie van de uitbreidingseenheid afdrukken en voorbereiden><iphbg/rzamdexpanupgradelpardoc.htm>
<7><Schijfgeheugen opschonen><iphbg/cleandisks.htm>
<7><Serverhardware opschonen><iphbg/cleansystem.htm>
<7><Geheugen- en verwerkingsresources aanpassen><iphbg/adjustmemproc.htm>
<7><Configuratieobjecten wijzigen><iphbg/changeobject.htm>
<7><Prestatiegegevens verzamelen><iphbg/gatherperfdata.htm>
<7><Console voorbereiden><iphbg/prepareconsole.htm>
<7><Backup van gegevens maken><iphbg/backupdata.htm>
<6><Het testplan ontwikkelen><iphbg/developtestplan.htm>
<6><De acceptatiecontrole plannen><iphbg/schedulereview.htm>
<5><Taken vóór het installeren><iphbg/preinstallationtasks.htm>
<6><Servergegevens afdrukken><iphbg/printsystem.htm>
<6><LPAR-configuratie kopiëren naar diskette><iphbg/copylparconfig.htm>
<6><Gebruikers-ID's en wachtwoorden noteren><iphbg/recorduserid.htm>
<6><Locatie voorbereiden op de upgrade><iphbg/preparelocation.htm>
<6><Projectplan en plan voor onvoorziene omstandigheden controleren><iphbg/reviewplans.htm>
<5><Installatietaken><iphbg/installationtasks.htm>
<6><Controleren of de benodigde taken zijn voltooid><iphbg/completetasks.htm>
<6><Software installeren><iphbg/installsw.htm>
<7><i5/OS en bijbehorende software upgraden><iphbg/uptov5r3.htm>
<7><Linux upgraden en voorbereiden op de serverupgrade><iphbg/preplinux.htm>
<8><Red Hat Enterprise Linux voorbereiden op een serverupgrade><iphbg/prepredhat.htm>
<8><SUSE LINUX Enterprise Server voorbereiden op een serverupgrade><iphbg/prepsuse.htm>
<7><AIX bijwerken, migreren en voorbereiden op de serverupgrade><iphbg/softaix.htm>
<7><Fixes installeren><iphbg/installfixes.htm>
<7><Een backup maken van de server><iphbg/systembackup.htm>
<6><Hardware installeren><iphbg/installhardware.htm>
<7><De definitieve servervoorbereiding voor de upgrade voltooien><iphbg/finalpreptasks.htm>
<7><Controlelijsten en servergegevens leveren><iphbg/validatereadiness.htm>
<7><De server afsluiten><iphbg/shutdownhandoff.htm>
<7><Hardware-installatie uitvoeren (geautoriseerde serviceprovider)><iphbg/servicereptasks.htm>
<7><De doelserver ontvangen><iphbg/machineacceptance.htm>
<5><Taken na de installatie><iphbg/postinstallationtasks.htm>
<6><De serverconfiguratie afronden><iphbg/finalizeconfig.htm>
<6><Serverpartities en alle firmware opslaan><iphbg/savesystem.htm>
<6><De server testen><iphbg/testsystem.htm>
<4><Scenario's: Upgrades><iphbg/scenarios.htm>
<4><Problemen oplossen><iphbg/troubles.htm>
<4><Overige informatie><iphbg/hdrrelatedinfo.htm>
# End of navigation data from: iphbg/iphbgtoc.xml
# Start of navigation data from: iphbh/iphbhtoc.xml
<3><Gegevensmigratie><iphbh/hdrkickoff.htm>
<4><Nieuw><iphbh/hdrwhatnew.htm>
<4><Afdrukbare PDF><iphbh/hdrprint.htm>
<4><Concepten><iphbh/concepts.htm>
<4><Uw gegevensmigratie plannen><iphbh/hdrplanmigration.htm>
<5><Hardware-overwegingen voor het plannen van gegevensmigratie><iphbh/planhardw.htm>
<5><Software-overwegingen voor het plannen van gegevensmigratie><iphbh/plansoftw.htm>
<5><Console-overwegingen voor het plannen van gegevensmigratie><iphbh/planconn.htm>
<5><Het gegevensmigratieplan opstellen><iphbh/finishplan.htm>
<4><De gegevensmigratie voorbereiden><iphbh/hdrmigrationprep.htm>
<5><De gegevensmigratie voorbereiden met OS/400 V5R3 op de bronserver><iphbh/migratev5r3.htm>
<5><Gegevensmigratie vanuit V5R1 of V5R2 voorbereiden><iphbh/hdmigrationprep45xx.htm>
<5><Gegevensmigratie vanaf een Linux-partitie voorbereiden><iphbh/preplinux.htm>
<6><Gegevensmigratie vanuit Red Hat Enterprise Linux voorbereiden><iphbh/prepmigredhat.htm>
<6><Gegevensmigratie vanuit SUSE LINUX Enterprise Server voorbereiden><iphbh/prepsuselinux.htm>
<4><De gegevensmigratie uitvoeren><iphbh/performing.htm>
<5><De gegevensmigratie voltooien met OS/400 V5R3 op de bronserver><iphbh/hdrmigrationproc.htm>
<5><Gegevensmigratie vanuit V5R1 of V5R2 voltooien><iphbh/hdrmigrationproc45xx.htm>
<5><Gegevensmigratie vanaf een partitie in Linux voltooien><iphbh/completelinux.htm>
<6><Gegevensmigratie vanuit Red Hat Enterprise Linux voltooien><iphbh/completeredhat.htm>
<6><Gegevensmigratie vanuit SUSE LINUX Enterprise Server 9 voltooien><iphbh/completesuselinux.htm>
<4><Scenario's: Gegevensmigratie><iphbh/scenarios.htm>
<4><Problemen oplossen><iphbh/troubles.htm>
<4><Overige informatie><iphbh/relinfo.htm>
# End of navigation data from: iphbh/iphbhtoc.xml
<2><pSeries-servers><iphbj/pserieskickoff.htm>
# Start of navigation data from: iphbm/iphbmtoc.xml
<3><Upgrades><iphbm/iphbmkickoff.htm>
<4><Afdrukbare PDF's><iphbm/iphbmprintthis.htm>
<4><Concepten><iphbm/iphbmconcepts.htm>
<5><Upgradepaden><iphbm/iphbmpaths.htm>
<5><Upgrade-overwegingen><iphbm/iphbm_upgrade_considerations.htm>
<5><Upgradeterminologie voor pSeries><iphbm/iphbmupgradeterms.htm>
<4><Controlelijst voor upgrade><iphbm/iphbmupgradechecklist.htm>
<4><Server upgraden><iphbm/iphbmupgradesteps.htm>
<5><Planningstaken voor upgrade><iphbm/iphbm_plan_checklist.htm>
<5><Besteltaken><iphbm/iphbmorder.htm>
<6><Bestelling samenstellen><iphbm/iphbm_configorder.htm>
<6><Uw bestelling valideren><iphbm/iphbm_validateorder.htm>
<6><Het projectplan voor de upgrade controleren><iphbm/iphbm_validateprojectp.htm>
<6><Uw bestelling plaatsen><iphbm/iphbm_placeorder.htm>
<5><Voorbereidingstaken><iphbm/iphbmplanupgrade.htm>
<6><Het upgradeschema bevestigen><iphbm/iphbmschedule.htm>
<6><Schijfgeheugen opschonen><iphbm/iphbmcleanupdisk.htm>
<6><Geheugen- en verwerkingsresources aanpassen><iphbm/iphbmadjustmem.htm>
<6><Het testplan ontwikkelen><iphbm/iphbmdeveloptest.htm>
<6><De acceptatiecontrole plannen><iphbm/iphbmacceptreview.htm>
<5><Taken vóór het installeren><iphbm/iphbmprepare.htm>
<6><Softwareoverwegingen><iphbm/iphbm_sw_considerations.htm>
<6><Vereisten voor systeembackups><iphbm/iphbm_sys_backup.htm>
<6><Locatie voorbereiden op de upgrade><iphbm/iphbmlocation.htm>
<6><Projectplan en plan voor onvoorziene omstandigheden controleren><iphbm/iphbmcontingency.htm>
<6><De AIX-opdracht pre_migration uitvoeren><iphbm/iphbm_run_premigration.htm>
<5><De upgrade uitvoeren><iphbm/iphbmupgradetasks.htm>
<6><AIX bijwerken naar een nieuw onderhoudsniveau><iphbm/iphbm_updateall_howto.htm>
<6><AIX migreren naar een nieuwe versie of release><iphbm/iphbm_migration_howto.htm>
<6><Een backup van AIX maken op CD><iphbm/iphbmbackup.htm>
<6><HMC-beheeromgeving configureren><ipha1/configuringyourhmcmanagementenvironment.htm>
<6><Bestaande partitieprofielen opslaan vanaf een Hardware Management Console><iphbm/iphbm_migrate_part.htm>
<6><Een AIX-backup herstellen vanaf CD><iphbm/iphbm_update_profiles.htm>
<5><De server testen><iphbm/iphbmtesting.htm>
<4><Scenario's: pSeries-upgrades><iphbm/iphbmupgradescenarios.htm>
<4><Problemen oplossen><iphbm/iphbmupgradetroubleshoot.htm>
<4><Overige informatie><iphbm/iphbmupgraderelatedinfo.htm>
# End of navigation data from: iphbm/iphbmtoc.xml
# End of navigation data from: iphbj/iphbjtoc.xml
# Start of navigation data from: iphb2/iphb2toc.xml
<1><Virtuele computeromgeving gebruiken><iphb2/kickoff.htm>
<2><Nieuwe functies><iphb2/whatnew.htm>
<2><Afdrukbare PDF's><iphb2/printablepdfs.htm>
<2><Overzicht van virtualisatie><iphb2/whatisvirtualization.htm>
<3><IBM Virtualization Engine><iphb2/virtualizationengine.htm>
<4><Virtualization Engine-systeemservices><iphb2/virtsystemsservices.htm>
<3><Virtualisatietechnologieën><iphb2/virtsystemstechnologies.htm>
<4><POWER Hypervisor><iphb2/virthypervisor.htm>
<4><Micropartitionering><iphb2/virtmicropart.htm>
<4><Virtuele netwerkactiviteiten, adapters en opslag><iphb2/virtnetworking.htm>
<5><Virtuele I/O-server><iphb2/virtio.htm>
<5><Ondersteuning voor virtuele resources voor i5/OS><iphb2/virti5os.htm>
<4><Capacity on demand><iphb2/virtcod.htm>
<4><Ondersteuning voor meerdere besturingssystemen><iphb2/virtmultossup.htm>
<4><Resourcebeheer op logische partities><iphb2/dynamicallyaddingresources.htm>
<4><Advanced POWER Virtualization technologieën><iphb2/apv.htm>
<4><Advanced OpenPower Virtualization technologieën><iphb2/aopv.htm>
<2><Planning voor een virtuele computeromgeving><iphb2/planningforyourvirtualizedenvironment.htm>
<2><Overige informatie><iphb2/related.htm>
# End of navigation data from: iphb2/iphb2toc.xml
# Start of navigation data from: iphag/iphagtoc.xml
<1><Installing hardware><iphag/installhardware.htm>
# Start of navigation data from: iphah/iphahtoc.xml
<2><Cabling your server><iphah/cablekickoff.htm>
<3><Printable PDF><iphah/printiphah.htm>
<3><Select by model><iphah/selectbymodel.htm>
<3><Serial uninterruptible power supply conversion cable><iphah/upscable.htm>
<3><References><iphah/references.htm>
# End of navigation data from: iphah/iphahtoc.xml
# Start of navigation data from: iphai/iphaitoc.xml
<2><Console toevoegen><iphai/addconsole.htm>
<3><Hardware Management Console><iphai/hmc.htm>
<4><Afdrukbare PDF><iphai/printhmcpdf.htm>
<4><HMC-overzicht><iphai/concepts.htm>
<5><Implementaties van Hardware Management Consoles><iphai/hmctypes.htm>
<5><Vooraf gedefinieerde wachtwoorden><iphai/whychgprepwds.htm>
<5><Installatievereisten voor de client op afstand><iphai/remoteinstallreqs.htm>
<5><Vergelijking van clients op afstand><iphai/staticvswebstart.htm>
<5><Beveiliging Systeembeheer><iphai/clientserver.htm>
<4><HMC installeren><iphai/installhmc.htm>
<5><Bekabeling van de HMC><iphai/cable.htm>
<5><Vereiste configuratie-instellingen verzamelen><iphai/prep.htm>
<5><HMC configureren><iphai/configure.htm>
<6><Installatiewegwijzer gebruiken><iphai/confighmcgs.htm>
<6><HMC-configuratiechecklist gebruiken><iphai/configchklst.htm>
<4><Client op afstand installeren en beveiligen><iphai/remotehmc.htm>
<4><Console voor beheer van i5/OS wijzigen><iphai/chgos400con.htm>
<5><HMC naar Operations Console><iphai/hmctoops.htm>
<5><HMC naar twinaxconsole><iphai/hmctotwinax.htm>
<5><Operations Console naar HMC><iphai/opstohmc.htm>
<5><Twinaxconsole naar HMC><iphai/twinaxtohmc.htm>
<4><Problemen oplossen><iphai/troubleshoot.htm>
<4><Overige informatie><iphai/relatedinfo.htm>
# Start of navigation data from: iphby/iphbytoc.xml
<3><Advanced System Management Interface><iphby/asmi.htm>
<4><Afdrukbare PDF><iphby/printasmipdf.htm>
<4><Toegang tot de ASMI met een webbrowser><iphby/browser.htm>
<4><Toegang tot de ASMI met een ASCII-console><iphby/ascii.htm>
<4><Toegang tot de ASMI met de HMC><iphby/asmihmc.htm>
<4><Problemen oplossen><iphby/troubleshootasmi.htm>
# End of navigation data from: iphby/iphbytoc.xml
# Start of navigation data from: iphbx/iphbxtoc.xml
<3><Operations Console><iphbx/opsconsole.htm>
<4><Nieuwe functies><iphbx/whatnew.htm>
<4><Afdrukbare PDF><iphbx/print.htm>
<4><Soorten Operations Consoles><iphbx/opsconnaming.htm>
<4><Operations Console plannen><iphbx/planning.htm>
<5><Uw configuratie plannen><iphbx/planconfig.htm>
<6><Overwegingen><iphbx/consoleplanningconsiderations.htm>
<6><Een backupconsole plannen><iphbx/backupconsole.htm>
<6><Scenario's: Uw configuratie selecteren><iphbx/scenarios.htm>
<7><Enkele console (direct aangesloten)><iphbx/scenarioone.htm>
<7><Enkele console (direct aangesloten met ondersteuning op afstand)><iphbx/scenariotwo.htm>
<7><Consoles voor verschillende servers><iphbx/scenariothree.htm>
<6><Uw netwerkomgeving voorbereiden><iphbx/minnetwork.htm>
<6><Uw consoleconfiguratie beveiligen><iphbx/security.htm>
<6><Configuratie van uw console en iSeries Navigator voorbereiden><iphbx/opsnav.htm>
<6><Consolevereisten controleren><iphbx/verifyrequirements.htm>
<7><Hardwarevereisten><iphbx/hardwarereq.htm>
<7><Softwarevereisten><iphbx/softwarereq.htm>
<7><Beschikbare communicatiepoorten><iphbx/verifycommport.htm>
<5><Een installatie of upgrade plannen><iphbx/planupgrade.htm>
<5><Virtueel bedieningspaneel en bedieningspaneel op afstand><iphbx/controlpanel.htm>
<6><De VCP en RCP plannen><iphbx/planvirtualcp.htm>
<6><VCP-overwegingen beoordelen><iphbx/vcpconsiderations.htm>
<6><VCP installeren><iphbx/installvcp.htm>
<4><PC voorbereiden voor Operations Console><iphbx/setup.htm>
<5><Een aangepaste checklist met vereisten voor de installatie maken><iphbx/iphbxopint.htm>
<5><De checklist van vereisten voor de installatie bekijken><iphbx/prereqtasks.htm>
<6><Hardwarevereisten controleren><iphbx/hardwarereq.htm>
<6><Softwarevereisten controleren><iphbx/softwarereq.htm>
<6><Beschikbare communicatiepoort controleren><iphbx/verifycommport.htm>
<6><Het vereiste controleprogramma uitvoeren><iphbx/prereqchecking.htm>
<6><Installatie van iSeries Access for Windows><iphbx/installca.htm>
<6><Servicepakketten voor iSeries Access for Windows toepassen><iphbx/applyservicepacks.htm>
<6><Verbindingsmodem installeren><iphbx/conmodem.htm>
<6><PC-modem installeren><iphbx/pcmodem.htm>
<6><Installatie van TCP/IP bevestigen><iphbx/confirmtcp.htm>
<6><Remote Access Service installeren of configureren><iphbx/installras.htm>
<6><Microsoft-servicepakket installeren><iphbx/installmsservicepack.htm>
<6><Toegang op afstand verlenen><iphbx/grantingremote.htm>
<6><Ingaande verbindingen maken en configureren><iphbx/incoming.htm>
<6><Een consolekabel installeren><iphbx/installcable.htm>
<6><Operations Console configureren><iphbx/installopscon.htm>
<4><Operations Console beheren><iphbx/manageopscons.htm>
<5><Uw consoleconfiguratie beheren><iphbx/managelocal.htm>
<6><Een consoleconfiguratie wijzigen><iphbx/chngelr.htm>
<6><Een consoleconfiguratie wissen><iphbx/dellr.htm>
<6><Een lokale console met een server verbinden><iphbx/connectingserver.htm>
<7><Lokale console (op een netwerk [LAN])><iphbx/connectlanlcs.htm>
<7><Lokale console (direct aangesloten)><iphbx/connectattend.htm>
<7><Lokale console met andere server><iphbx/connectanother.htm>
<6><Een console op afstand via een modem met een lokale console verbinden><iphbx/connectrcs.htm>
<6><Taken tussen gebruikers controleren><iphbx/controltasks.htm>
<7><Een gebruiker identificeren die een server bestuurt><iphbx/identifyuser.htm>
<7><De besturing over een console op afstand verlenen of weigeren><iphbx/grantrefusercs.htm>
<7><De besturing op een lokale console aanvragen en vrijgeven><iphbx/reqandrelatlcs.htm>
<7><De besturing op een console op afstand aanvragen><iphbx/requestatrcs.htm>
<7><De besturing op een console op afstand vrijgeven><iphbx/releaseatrcs.htm>
<7><Een bericht naar een besturingsconsole verzenden><iphbx/sendmesstocntrlcon.htm>
<7><de besturing tussen gebruikers overdragen><iphbx/interactions.htm>
<6><De eigenschappenpagina gebruiken><iphbx/properties.htm>
<6><Het beeldscherm aanpassen><iphbx/customizing.htm>
<5><Verschillende Operations Consoles beheren><iphbx/manageshared.htm>
<6><Verschillende lokale consoles (op een netwerk [LAN]) beheren><iphbx/multiplelocalconsoles.htm>
<6><Verschillende consoles op afstand beheren><iphbx/multipleremoteconsoles.htm>
<6><Van een bepaald consoletype overschakelen naar een ander type><iphbx/switchconsoleavailable.htm>
<7><Console voor beheer van OS/400 wijzigen><iphbx/changeconsoletype.htm>
<7><Naar een ander consoletype overschakelen om de toegang tot het systeem terug te halen><iphbx/recoverswitch.htm>
<6><Een consoleverbinding overnemen of terughalen><iphbx/consoletakeoverandrecover.htm>
<7><Informatie over het overnemen en terughalen van een console><iphbx/abouttakerecov.htm>
<7><Overwegingen voor het overnemen><iphbx/takeoverdetails.htm>
<7><Overwegingen voor het terughalen><iphbx/recoverydetails.htm>
<7><Het overnemen van een console mogelijk maken><iphbx/enableconsoletakeover.htm>
<7><Scenario's><iphbx/consolescenarios.htm>
<5><Console voor beheer van OS/400 wijzigen><iphbx/changeconsoletype.htm>
<6><Lokale console (LAN en direct)><iphbx/opstoops.htm>
<7><Direct naar LAN zonder HMC><iphbx/opsdirtoopslannohmc.htm>
<7><LAN naar direct zonder HMC><iphbx/opslantoopsdirnohmc.htm>
<7><LAN of direct met HMC><iphbx/opstoopshmc.htm>
<6><Operations Console en twinaxconsole><iphbx/opstwin.htm>
<7><Operations Console naar twinaxconsole zonder HMC><iphbx/opstotwinnohmc.htm>
<7><Operations Console naar twinaxconsole met HMC><iphbx/opstotwinhmc.htm>
<7><Twinaxconsole naar Operations Console zonder HMC><iphbx/twintoopsnohmc.htm>
<7><Twinaxconsole naar Operations Console met HMC><iphbx/opstwin.htm>
<6><Operations Console en HMC><iphai/chgos400con.htm>
<5><Uw lokale console (op een netwerk [LAN] beheren)><iphbx/managepasswords.htm>
<6><Overwegingen voor het wijzigen van het wachtwoord voor het apparatuur-ID van de servicetools.><iphbx/considsdw.htm>
<6><Het wachtwoord voor het apparatuur-ID van de servicetools wijzigen.><iphbx/apforwind.htm>
<6><Het toegangswachtwoord wijzigen><iphbx/chpssuacc.htm>
<6><Het wachtwoord voor de PC en het apparatuur-ID van de servicetools opnieuw synchroniseren.><iphbx/resynchrpa.htm>
<7><Het wachtwoord voor het apparatuur-ID opnieuw instellen met behulp van een ander apparaat><iphbx/recoverserveranotherdevice.htm>
<7><Het wachtwoord voor het apparatuur-ID opnieuw instellen met behulp van een ander apparatuur-ID><iphbx/recoverserverunusedid.htm>
<7><Het apparatuur-ID QCONSOLE opnieuw instellen><iphbx/recoverserverqconsole.htm>
<7><Het wachtwoord voor het apparatuur-ID opnieuw instellen op de PC><iphbx/recoverpc.htm>
<6><Apparatuur-ID's voor servicetools maken><iphbx/setupid.htm>
<6><Een service-hostnaam (interfacenaam) configureren><iphbx/setuphostname.htm>
<6><De LAN-adapter uitschakelen of verplaatsen><iphbx/lancard.htm>
<6><Netwerkwaarden wijzigen><iphbx/chgnetvals.htm>
<5><Algemene taken uitvoeren><iphbx/commonservertasks.htm>
<6><Toetsenborddefinities wijzigen><iphbx/changekeyboard.htm>
<6><De server starten en stoppen><iphaj/crustopstartsys.htm>
<6><De communicatielijn activeren><iphbx/activating.htm>
<6><De communicatielijn deactiveren><iphbx/deactivating.htm>
<6><Servicefuncties van console gebruiken (65+21)><iphbx/functions6521.htm>
<7><Informatie over de functies><iphbx/availcsfs.htm>
<7><Werking van de functies><iphbx/howcfswork.htm>
<7><Functies openen><iphbx/accesscsf.htm>
<7><Uw voortgang bijhouden><iphbx/trackcsf.htm>
<6><De standaardmacro OPSCONSOLE gebruiken><iphbx/nativemacro.htm>
<6><Apparatuur-ID's van servicetools ontgrendelen in SST><iphbx/unlocksst.htm>
<4><Probleemoplossing voor Operations Console-verbindingen><iphbx/troubleshooting.htm>
<5><Statusberichten><iphbx/troublestatus.htm>
<6><Wanneer de configuratie normaal wordt uitgevoerd><iphbx/troublestatusnormal.htm>
<6><Wanneer u verbindingsproblemen hebt><iphbx/troublestatuswrong.htm>
<5><Verbindingsproblemen><iphbx/troubleconnection.htm>
<6><Verbindingsproblemen met lokale console><iphbx/troublelocalconnection.htm>
<7><Verbinding met console mislukt><iphbx/troubleconsolefails.htm>
<7><Netwerkverbindingsfouten><iphbx/troublenetwork.htm>
<7><Fout: de verbinding met het systeem is niet beveiligd><iphbx/troublesecureconnection.htm>
<7><Status blijft Bezig met verbinden><iphbx/troublestatusremains.htm>
<7><Consoleverbinding en poortdetectie mislukt><iphbx/troubleportfails.htm>
<7><Prestatievermindering><iphbx/troubleperformance.htm>
<7><Er kan geen verbinding worden gemaakt met de geïnstalleerde infraroodapparaten><iphbx/troubleinfrared.htm>
<7><Onverwachte onderbrekingen van de verbinding><iphbx/troubleunexpected.htm>
<7><HyperTerminal gebruiken om de connectiviteit te valideren><iphbx/hyperterm.htm>
<7><Het wachtwoord voor de PC en het apparatuur-ID van de servicetools opnieuw synchroniseren.><iphbx/resynchrpa.htm>
<6><Verbindingsproblemen met console op afstand><iphbx/troubleremoteconnection.htm>
<7><Verbinding met console op afstand mislukt><iphbx/troubleremotedu.htm>
<7><Naam van lokale console komt niet overeen><iphbx/troublenamemismatch.htm>
<5><Verificatieproblemen><iphbx/troubleauth.htm>
<6><Fouten><iphbx/troubleauthentication.htm>
<6><Fouten met Windows NT-Servicepakket 6><iphbx/troubleerrorsnt.htm>
<5><Emulatorproblemen><iphbx/troubleemulator.htm>
<6><Emulator van lokale console heeft de status Verbinding verbroken><iphbx/troubleemulatorfails.htm>
<6><PC5250-venster beeldt geen gebruikersgegevens af><iphbx/troublepc5250.htm>
<5><SRC-gegevens (System Reference Code)><iphbx/troublesrc.htm>
<6><A600500A, A600500B, A600500C, A600500D, B600500A, B600500B, B600500C en B600500D><iphbx/a600500a.htm>
<6><A6005001, A6005004, A6005007, B6005001, B6005004 en B6005007><iphbx/troublesrccodes.htm>
<6><A6005008 en B6005008><iphbx/troublesrccoded.htm>
<6><A9002000><iphbx/troublesrccodea.htm>
<6><A6005082><iphbx/troubledisappear.htm>
<6><0000DDDD><iphbx/troublesrccode00dd.htm>
<6><D1008065 en D1008066 wordt niet afgebeeld><iphbx/troublepost.htm>
<6><IPL-stap C6004031 duurt langer dan verwacht><iphbx/troubleiplstep.htm>
<5><RCP- en VCP-problemen><iphbx/troublecontrolpanels.htm>
<6><RCP wordt niet gestart><iphbx/troublercp.htm>
<6><De werkstandfunctie kan niet worden gebruikt><iphbx/troublemodefunction.htm>
<6><VCP-verificatiefouten><iphbx/vcptroubleshoot.htm>
<5><Configuratiewizard-problemen><iphbx/troublewizard.htm>
<6><Lokale console vindt geen kabels><iphbx/troubledetectcable.htm>
<6><Oude netwerkgegevens belemmeren de herconfiguratie><iphbx/troublereconfig.htm>
<6><Juiste modem kan niet worden gevonden><iphbx/troublemodem.htm>
<5><Andere problemen><iphbx/troubleother.htm>
<6><Console blijft in QCTL><iphbx/troubleqctl.htm>
<6><Bericht: RAS-server (Remote Access Service) is niet gestart><iphbx/troublerasmessage.htm>
<6><Systeemopdrachten functioneren niet><iphbx/troublesysreq.htm>
<4><Overige publicaties><iphbx/relatedinfo.htm>
# End of navigation data from: iphbx/iphbxtoc.xml
# Start of navigation data from: iphbn/iphbntoc.xml
<3><Twinaxconsole><iphbn/kickoff.htm>
<4><Afdrukbare PDF's><iphbn/printpdf.htm>
<4><Twinaxconsole in een IBM eServer-omgeving><iphbn/twxfitseserver.htm>
<4><Twinaxconsole installeren><iphbn/setupchklst.htm>
<4><Console voor beheer van OS/400 wijzigen><iphbn/changeconsoletwin.htm>
<4><Overige informatie><iphbn/relatedinfo.htm>
# End of navigation data from: iphbn/iphbntoc.xml
<3><Grafisch werkstation><iphai/graphics.htm>
# End of navigation data from: iphai/iphaitoc.xml
# Start of navigation data from: iphaj/iphajtoc.xml
<2><Installing features and replacing parts><iphaj/installcifcio.htm>
<3><What's new><iphaj/whatsnew.htm>
<3><Select by model or expansion unit><iphaj/selectmodel.htm>
<4><520><iphaj/iphw2.htm>
<4><550><iphaj/iphw4.htm>
<4><570><iphaj/iphwm.htm>
<4><590 and 595><iphaj/hwiph.htm>
<4><9110-510><iphaj/hv2b70.htm>
<4><9118-575><iphaj/ih.htm>
<4><9411-100><iphaj/eu9411.htm>
<4><5074 and 5079><iphaj/ipheu5074.htm>
<4><5088 and 0588><iphaj/ipheu5088.htm>
<4><5094 and 5294><iphaj/ipheu5094.htm>
<4><5095 and 0595><iphaj/ipheu5095.htm>
<4><5794, 5791, and 7040-61D><iphaj/ipheu5794.htm>
<4><7311-D11, 7311-D10, and 5790><iphaj/ipheu7311d11.htm>
<4><7311-D20><iphaj/ipheu7311d20.htm>
<4><OpenPower><iphaj/openpower.htm>
<3><Select by feature or part><iphaj/selectcifcio.htm>
# End of navigation data from: iphaj/iphajtoc.xml
# End of navigation data from: iphag/iphagtoc.xml
# Start of navigation data from: iphat/iphattoc.xml
<1><De server partitioneren><iphat/iphatlparkickoff.htm>
<2><Nieuwe functies><iphat/iphatwhatsnew.htm>
<2><Afdrukbare PDF's><iphat/iphatprintpdfs.htm>
<2><Concepten voor partitionering van de server><iphat/iphatlparconceptskickoff.htm>
<3><Voordelen van partitionering><iphat/iphatlparbenefits.htm>
<3><Configuratietypen voor logische partities><iphat/iphatlpartypes.htm>
<4><Logische partities><iphat/iphatlparchoices.htm>
<4><Standaardconfiguratie bij levering><iphat/iphatlparmgc.htm>
<4><Servicepartitie><iphat/iphatservicelpar.htm>
<4><Partitie van virtuele I/O-server><iphat/iphatvirtualioserveroverview.htm>
<3><Onderdelen van een partitie><iphat/iphatlparcomponents.htm>
<4><Beheerde systemen><iphat/iphatmanagesys.htm>
<4><Profielen><iphat/iphatlparprofiles.htm>
<5><Partitieprofiel><iphat/iphatparprofile.htm>
<5><Partitieprofielen met alle systeemresources><iphat/iphatfullsystem.htm>
<5><Systeemprofiel><iphat/iphatsysprofile.htm>
<3><Hardwareresources><iphat/iphatlparhw.htm>
<4><Minimumconfiguratie><iphat/iphatlparosmin.htm>
<5><AIX><iphat/iphbkaixminreqs.htm>
<5><i5/OS><iphat/iphbllparosmin.htm>
<5><Linux><iphat/iphbiminimumconfig.htm>
<4><Fysieke en virtuele hardwareresources><iphat/iphatphysicalvsvirtual.htm>
<5><Virtuele adapters><iphat/iphbivirtualadapters.htm>
<5><Toepassing van virtuele resources door de besturingssystemen><iphat/iphatosvirtualoverview.htm>
<6><AIX><iphat/iphataixvirtual.htm>
<6><i5/OS><iphat/iphati5osvirtual.htm>
<7><Virtuele seriële adapters><iphat/iphbivirtualserial.htm>
<7><Virtuele SCSI><iphat/iphbivirtualscsi.htm>
<6><Linux><iphat/iphatlinuxvirtual.htm>
<5><Processors><iphat/iphatlparprocessor.htm>
<6><Vast toegewezen processors><iphat/iphatdedproc.htm>
<6><Gemeenschappelijke processors><iphat/iphatsharedproc.htm>
<7><Virtuele processors><iphat/iphatvirtualproc.htm>
<7><Overwegingen voor licentieovereenkomsten van i5/OS><iphat/iphblos400license.htm>
<5><Geheugen><iphat/iphatlparmemory.htm>
<6><Geheugen voor logische AIX-partities><iphat/iphbkaixmemreqs.htm>
<6><Geheugen voor logische i5/OS-partities><iphat/iphbllparmemory.htm>
<6><Geheugen voor logische Linux-partities><iphat/iphbilinuxmemory.htm>
<5><Uitbreidingseenheid><iphat/iphatexpansionunit.htm>
<5><Consoles><iphat/iphatlparconsole.htm>
<6><HMC><iphat/iphathmc.htm>
<6><Operations Console><iphat/iphatoperationsconsole.htm>
<6><Twinaxconsole><iphat/iphattwinax.htm>
<5><I/O><iphat/iphbliodevices.htm>
<6><I/O-pools><iphat/iphbliopools.htm>
<6><IOP's><iphat/iphbllpariop.htm>
<7><Tagged resources><iphat/iphbltag.htm>
<7><Verwisselbare apparatuur><iphat/iphblswitchiop.htm>
<6><IOA's><iphat/iphbllparioa.htm>
<7><Laadbron><iphat/iphblloadsrc.htm>
<7><Alternatief herstartapparaat><iphat/iphblaltipl.htm>
<7><Schijfstation><iphat/iphbldunit.htm>
<5><5250 CPW><iphat/iphblinterperform.htm>
<3><Communicatieopties voor logische partities><iphat/iphatlparcommunication.htm>
<4><Virtueel Ethernet><iphat/iphatvirtualethernetoverview.htm>
<5><Virtueel Ethernet voor AIX><iphat/iphatvirtualethernetaix.htm>
<5><Virtueel Ethernet voor i5/OS><iphat/iphatvirtualetherneti5os.htm>
<5><Virtueel Ethernet voor Linux><iphat/iphatvirtualethernetlinux.htm>
<4><HSL OptiConnect><iphat/iphblhslopticonnect.htm>
<4><Virtual OptiConnect><iphat/iphblvirtualopticonnect.htm>
<3><Functies voor logische partities><iphat/iphatlparutilities.htm>
<4><LPAR Validation Tool><iphat/iphatlvt.htm>
<4><Partition Load Manager><iphat/iphatplmoverview.htm>
# Start of navigation data from: iphbk/iphbktoc.xml
<2><Partitionering voor AIX><iphbk/iphbkaixkickoff.htm>
<3><Nieuwe functies><iphbk/iphbkaixwhatsnew.htm>
<3><Afdrukbare PDF's><iphbk/iphbkprintthis.htm>
<3><Scenario's><iphbk/iphbkaixscenarios.htm>
<3><Planning voor logische partities in AIX><iphae/aixpartitions.htm>
<3><Logische partities configureren in AIX><iphbk/iphbkaixconfigure.htm>
<4><Logische partities en partitieprofielen maken><iphbl/iphblcreatelpar.htm>
<4><Extra partitieprofielen maken><iphbl/iphblcreateprofile.htm>
<4><Een servicepartitie aan het beheerde systeem toewijzen><iphbl/iphblservicepartition.htm>
<4><Logische partities maken van de standaardconfiguratie><iphbl/iphbldefaultlpar.htm>
<5><i5-servers><iphbl/iphbldefaultlpari5.htm>
<5><p5-servers><iphbl/iphbldefaultlparp5.htm>
<4><Logische partities in AIX migreren><iphbk/iphbkaixmigrate.htm>
<4><Een partitieprofiel kopiëren><iphbl/iphblcopyprofile.htm>
<4><Een systeemprofiel maken><iphbl/iphblsysprofile.htm>
<4><Een systeemprofiel kopiëren><iphbl/iphblcopysysp.htm>
<4><Een partitie in AIX maken die i5/OS-resources ontvangt><iphbl/iphblaixpartition.htm>
<4><Een logische partitie wissen><iphbl/iphbldeletelpar.htm>
<4><De server opnieuw instellen><iphbl/iphblresetserver.htm>
<3><Resourcebeheer met behulp van PLM (Partition Load Manager) configureren voor partities in AIX><iphbk/iphbkconfigureplm.htm>
<4><Partition Load Manager installeren><iphbk/iphbkinstplm.htm>
<4><Tools OpenSSH-software installeren><iphbk/iphbkopenssh.htm>
<4><Resource Management and Control configureren><iphbk/iphbkrmc_configuration.htm>
<4><Beleidsbestand configureren><iphbk/iphbkpolicy_file_configuration.htm>
<4><Installatie en configuratie verifiëren><iphbk/iphbkverifyinst.htm>
<5><OpenSSH-installatie verifiëren><iphbk/iphbkverifysshinst.htm>
<5><Configuratie Resource Management and Control verifiëren><iphbk/iphbkverifyrmc.htm>
<3><Logische partities beheren in AIX><iphbk/iphbkaixmanage.htm>
<4><Partitieprofielen voor logische partities beheren><iphbk/iphblmanagepprofile.htm>
<5><Een partitieprofiel activeren><iphbk/iphblactivate.htm>
<5><De eigenschappen van een partitieprofiel wijzigen><iphbk/iphblchangeprofile.htm>
<5><Een partitieprofiel wissen><iphbk/iphbldeleteprofile.htm>
<4><Systeemprofielen voor logische partities beheren><iphbk/iphblmanagesprofile.htm>
<5><Een systeemprofiel activeren><iphbk/iphblactivatesysprofile.htm>
<5><Een systeemprofiel wissen><iphbk/iphbldeletesysprofile.htm>
<4><Dynamisch beheer van resources voor logische partities in AIX><iphbk/iphbkaixmanagedynamic.htm>
<5><Dynamisch beheer van fysieke I/O-apparaten en -sleuven><iphbk/iphbldlpariop.htm>
<5><Dynamisch beheer van verwerkingscapaciteit><iphbk/iphbldlparprocpower.htm>
<5><Dynamisch beheer van geheugen><iphbk/iphbldlparmemory.htm>
<5><Planning van dynamische resourceverplaatsing><iphbk/iphblschedulelpar.htm>
<4><Partities op afstand beheren><iphbk/iphblpartitionremote.htm>
<4><Partitiestatus opvragen><iphbk/iphbkquerystatus.htm>
<4><Partities beheren in AIX met i5/OS><iphbk/iphblaixmanagingkickoff.htm>
<5><Virtuele schijven toevoegen aan een partitie in AIX><iphbk/iphbldynamicallyaddingaixdisks.htm>
<5><Netwerkserverbeschrijvingen beheren><iphbk/iphblaixnwsdoverview.htm>
<6><NWSSTG koppelen aan NSWD's><iphbk/iphblaixlinknwsstg.htm>
<6><NSWD's wissen><iphbk/iphblaixdeletenwsd.htm>
<6><Schijfstations wissen><iphbk/iphblaixdelete.htm>
<5><IPL-typen gebruiken in AIX><iphbk/iphblaixbootsource.htm>
<5><Backup en herstel van AIX-partities waarin i5/OS-resources worden ontvangen><iphbk/iphblaixrecoverykickoff.htm>
<6><De opdracht tar gebruiken><iphbk/iphblaixsavrstaixtar.htm>
<6><i5/OS-opdrachten gebruiken><iphbk/iphblos400commandaix.htm>
<5><Backups maken van de NWSD en schijfstations die gekoppeld zijn aan AIX><iphbk/iphblaixbackup.htm>
<6><Een backup maken van NWSD's voor logische partities in AIX><iphbk/iphblaixbackupnwsd.htm>
<6><NWSD's voor een partitie in AIX herstellen><iphbk/iphblaixrestore.htm>
<6><Schijfstations ontkoppelen van een logische partitie in AIX><iphbk/iphblaixunlink.htm>
<7><Serverobjecten in i5/OS opslaan><iphbk/iphblaixobjects.htm>
<4><Backup en herstel van logische partities in AIX><iphbk/iphbkaixbackup.htm>
<4><Fixes ophalen><iphbk/iphbkgettingfixes.htm>
<3><AIX gebruiken als dit is geïnstalleerd in een logische partitie><iphbk/iphbkaixuse.htm>
<4><Opnieuw starten en afsluiten van AIX op een logische partitie><iphbk/iphbkshutdownaix.htm>
<5><Afsluiten met behulp van de HMC><iphbk/iphbkshutdownhmc.htm>
<5><AIX-logische partities opnieuw opstarten><iphbk/iphbkrestartaix.htm>
<4><Beveiligingsbeheer><iphbk/iphbksecuritylpar.htm>
<4><Prestatie beheren><iphbk/iphbkperformancelpar.htm>
<3><Problemen oplossen><iphbk/iphbkaixtroubleshoot.htm>
<4><Referentiecodes voor logische partities><iphbl/iphblosrefcode.htm>
<3><Overige informatie><iphbk/iphbkaixrelated.htm>
# End of navigation data from: iphbk/iphbktoc.xml
# Start of navigation data from: iphbl/iphbltoc.xml
<2><Partitionering voor i5/OS><iphbl/iphbllparos400kickoff.htm>
<3><Nieuw><iphbl/iphblwhatsnew.htm>
<3><Afdrukbare PDF's><iphbl/iphblprintpdfs.htm>
<3><Scenario's><iphbl/iphblscenarioskickoff.htm>
<3><Planning voor logische partities in i5/OS><iphbl/iphblplanos400.htm>
<3><Logische partities configureren in i5/OS><iphbl/iphblconfigurelpar.htm>
<4><Logische partities en partitieprofielen maken><iphbl/iphblcreatelpar.htm>
<4><Extra partitieprofielen maken><iphbl/iphblcreateprofile.htm>
<4><Een servicepartitie aan het beheerde systeem toewijzen><iphbl/iphblservicepartition.htm>
<4><Logische partities maken van de standaardconfiguratie><iphbl/iphbldefaultlpar.htm>
<5><i5-servers><iphbl/iphbldefaultlpari5.htm>
<5><p5-servers><iphbl/iphbldefaultlparp5.htm>
<4><Logische partities in i5/OS migreren><iphbl/iphblmigrateos400.htm>
<4><Een partitieprofiel kopiëren><iphbl/iphblcopyprofile.htm>
<4><Een systeemprofiel maken><iphbl/iphblsysprofile.htm>
<4><Een systeemprofiel kopiëren><iphbl/iphblcopysysp.htm>
<4><Een logische partitie in AIX maken met virtuele i5/OS-I/O-resources><iphbl/iphblaixpartition.htm>
<5><Een netwerkserverbeschrijving maken><iphbl/iphblaixnwsd.htm>
<5><Verbinding met de virtuele console maken><iphbl/iphblaixvirtualconsole.htm>
<5><NWSD starten en stoppen><iphbl/iphblvaryonaix.htm>
<4><Een logische partitie in Linux maken met virtuele i5/OS-I/O-resources><iphbl/iphblioserverpartition.htm>
<5><Een netwerkserverbeschrijving maken><iphbl/iphblnwsd.htm>
<5><Verbinding met de virtuele console maken><iphbl/iphblvirtualconsole.htm>
<5><NWSD starten en stoppen><iphbl/iphblvaryon.htm>
<4><Een logische partitie wissen><iphbl/iphbldeletelpar.htm>
<4><De server opnieuw instellen><iphbl/iphblresetserver.htm>
<3><Logische partities beheren in i5/OS><iphbl/iphblmanageos400.htm>
<4><Partitieprofielen beheren><iphbl/iphblmanagepprofile.htm>
<5><Een partitieprofiel activeren><iphbl/iphblactivate.htm>
<5><De eigenschappen van een partitieprofiel wijzigen><iphbl/iphblchangeprofile.htm>
<5><Een partitieprofiel wissen><iphbl/iphbldeleteprofile.htm>
<4><Systeemprofielen beheren><iphbl/iphblmanagesprofile.htm>
<5><Een systeemprofiel activeren><iphbl/iphblactivatesysprofile.htm>
<5><Een systeemprofiel wissen><iphbl/iphbldeletesysprofile.htm>
<4><Dynamisch beheer van resources voor logische partities><iphbl/iphblmanageos400movement.htm>
<5><Dynamisch beheer van de 5250 CPW><iphbl/iphbldlparinteractive.htm>
<5><Dynamisch beheer van fysieke I/O-apparaten en -sleuven><iphbl/iphbldlpariop.htm>
<5><Dynamisch beheer van geheugen><iphbl/iphbldlparmemory.htm>
<5><Dynamisch beheer van verwerkingscapaciteit><iphbl/iphbldlparprocpower.htm>
<5><Planning van dynamische resourceverplaatsing><iphbl/iphblschedulelpar.htm>
<4><Partities op afstand beheren><iphbl/iphblpartitionremote.htm>
<4><Nieuwe hardware installeren voor logische partities in i5/OS><iphbl/iphblinstallos400hw.htm>
<4><Partities beheren in AIX met i5/OS-resources><iphbl/iphblaixmanagingkickoff.htm>
<5><Virtuele schijven toevoegen aan een partitie in AIX><iphbl/iphbldynamicallyaddingaixdisks.htm>
<5><Netwerkserverbeschrijvingen beheren><iphbl/iphblaixnwsdoverview.htm>
<6><NWSSTG koppelen aan NSWD's><iphbl/iphblaixlinknwsstg.htm>
<6><Netwerkserverbeschrijvingen wissen><iphbl/iphblaixdeletenwsd.htm>
<6><Virtuele schijfstations verwijderen><iphbl/iphblaixdelete.htm>
<5><IPL-typen gebruiken in AIX><iphbl/iphblaixbootsource.htm>
<5><Backup en herstel van logische partities in AIX><iphbl/iphblaixrecoverykickoff.htm>
<6><De opdracht tar gebruiken><iphbl/iphblaixsavrstaixtar.htm>
<6><i5/OS-opdrachten gebruiken><iphbl/iphblos400commandaix.htm>
<5><Backups maken van de NSWD en schijfstations die gekoppeld zijn aan een AIX-partitie><iphbl/iphblaixbackup.htm>
<6><Een backup maken van NWSD's voor logische partities in AIX><iphbl/iphblaixbackupnwsd.htm>
<6><NWSD's voor een partitie in AIX herstellen><iphbl/iphblaixrestore.htm>
<6><Schijfstations ontkoppelen van een logische partitie in AIX><iphbl/iphblaixunlink.htm>
<7><Serverobjecten in i5/OS opslaan><iphbl/iphblaixobjects.htm>
<4><Partities in Linux beheren met i5/OS-resources><iphbl/iphblmanagingkickoff.htm>
<5><Virtuele schijven toevoegen aan een partitie in Linux><iphbl/iphbldynamicallyaddingdisks.htm>
<5><Netwerkserverbeschrijvingen beheren><iphbl/iphblnwsdoverview.htm>
<6><NWSSTG koppelen aan NSWD's><iphbl/iphbllinknwsstg.htm>
<6><Netwerkserverbeschrijvingen wissen><iphbl/iphbldeletenwsd.htm>
<6><Virtuele schijfstations verwijderen><iphbl/iphbldelete.htm>
<5><IPL-typen gebruiken in Linux><iphbl/iphblbootsource.htm>
<5><Backup en herstel van logische partities in Linux><iphbl/iphblrecoverykickoff.htm>
<6><De opdracht tar gebruiken><iphbl/iphblsavrstaixtar.htm>
<6><i5/OS-opdrachten gebruiken><iphbl/iphblos400command.htm>
<5><Backups maken van de NWSD en virtuele schijfstations voor logische partities in Linux><iphbl/iphblbackup.htm>
<6><Een herstelimage maken op een NWSSTG><iphbl/iphblrecoverimage.htm>
<6><Een herstelimage uit een NWSSTG gebruiken><iphbl/iphblrecoverysystem.htm>
<6><Een backup maken van NWSD's voor logische partities in Linux><iphbl/iphblbackupnwsd.htm>
<6><NWSD's voor een partitie in Linux herstellen><iphbl/iphblrestore.htm>
<6><Schijfstations ontkoppelen van een logische partitie in Linux><iphbl/iphblunlink.htm>
<7><Serverobjecten in i5/OS opslaan><iphbl/iphblobjects.htm>
<4><Fixes ophalen><iphbl/iphblgettingfixes.htm>
<3><i5/OS gebruiken als dit is geïnstalleerd in een logische partitie><iphbl/iphblusingi5os.htm>
<4><i5/OS opnieuw opstarten en afsluiten in een logische partitie><iphbl/iphblrestartos400.htm>
<5><i5/OS afsluiten><iphbl/iphblpowerdownos400.htm>
<6><Afsluiten met behulp van de HMC><iphbl/iphblsdlparhmc.htm>
<6><Afsluiten met behulp van de Operations Console><iphbl/iphblsdlparoc.htm>
<5><De werkstand wijzigen voor een logische partitie in i5/OS><iphbl/iphblos400mode.htm>
<5><Het IPL-type wijzigen voor een logische partitie in i5/OS><iphbl/iphblos400iplsource.htm>
<4><Beveiligingsbeheer><iphbl/iphblsecuritylpar.htm>
<4><Backup en herstel van i5/OS-gegevens><iphbl/iphblos400backupandrecovery.htm>
<4><De invloed van prestaties op i5/OS><iphbl/iphblos400performanceimpacts.htm>
<3><Problemen Oplossen><iphbl/iphbltroubleshootos400.htm>
<4><Referentiecodes voor partities><iphbl/iphblosrefcode.htm>
<4><Problemen oplossen voor partities in AIX><iphbl/iphblaixtroubleshootingkickoff.htm>
<5><Foutopsporing van NWSD-foutberichten><iphbl/iphblaixnwsderrors.htm>
<4><Problemen oplossen voor partities in Linux><iphbl/iphbltroubleshootingkickoff.htm>
<5><Foutopsporing van NWSD-foutberichten><iphbl/iphblnwsderrors.htm>
<5><Problemen oplossen met virtuele banden voor Linux><iphbl/iphbltsaixtape.htm>
<4><Situaties waarin u contact moet opnemen met een geautoriseerde serviceprovider><iphbl/iphblservicerep.htm>
<5><Een hoofdgeheugendump uitvoeren voor logische partities in i5/OS><iphbl/iphblperformsd.htm>
<5><Services op afstand gebruiken voor logische partities in i5/OS><iphbl/iphblremoteservice.htm>
<5><Een powerdomein afsluiten met logische partities><iphbl/iphbldomain.htm>
<5><De IOP van een schijfstation opnieuw instellen met logische partities in i5/OS><iphbl/iphblresetunit.htm>
<3><Overige informatie><iphbl/iphbllparrelated.htm>
# End of navigation data from: iphbl/iphbltoc.xml
# Start of navigation data from: iphbi/iphbi02.xml
<2><Partitionering voor Linux><iphbi/iphbikickoff.htm>
<3><Nieuwe functies><iphbi/iphbiwhatnew.htm>
<3><Afdrukbare PDF's><iphbi/iphbiprintthis.htm>
<3><Concepten voor logische Linux-partities><iphbi/iphbiconcept.htm>
<4><Hardwarevereisten voor logische Linux-partities><iphbi/iphbihardware.htm>
<5><Ondersteunde hardwareresources><iphbi/iphbidrivers.htm>
<5><Minimumvereisten voor configuratie><iphbi/iphbiminimumconfig.htm>
<5><Ondersteuning gemeenschappelijke processors><iphbi/iphbishared.htm>
<5><Consolevereisten><iphbi/iphbiconsole.htm>
<5><Geheugenopties><iphbi/iphbistorage.htm>
<4><Virtuele I/O-apparaten><iphbi/iphbivirtualnative.htm>
<4><Communicatieopties><iphbi/iphbinetworking.htm>
<4><Linux-distributies><iphbi/iphbipowerlinux.htm>
<3><Scenario's voor logische Linux-partities><iphbi/iphbiscenario.htm>
<4><Scenario: Partitieprofielen gebruiken><iphat/iphatscenario1.htm>
<4><Scenario: Systeemprofielen gebruiken><iphat/iphatscenario2.htm>
<4><Scenario: Serverconsolidatie><iphbi/iphbiserver.htm>
<4><Scenario: Capacity Upgrade on Demand><iphbi/iphbicuod.htm>
<4><Scenario: Een logische Linux-partitie en een partitieprofiel maken><iphbi/iphbilinuxscenario.htm#iphbilinuxscenario>
<3><Planning voor logische Linux-partities><iphae/linuxpartitions.htm>
<3><Logische Linux-partities configureren><iphbi/iphbiconfig.htm>
<4><Een logische partitie maken><iphbl/iphblcreatelpar.htm>
<4><Een partitieprofiel maken><iphbl/iphblcreateprofile.htm>
<4><Logische partities maken van de standaardconfiguratie><iphbi/iphbidefaultlparlinux.htm>
<5><i5-servers><iphbi/iphbldefaultlpari5.htm>
<5><p5-servers><iphbi/iphbldefaultlparp5.htm>
<5><OpenPower-servers><iphbi/iphbidefaultlparop.htm>
<4><Logische Linux-partities migreren><iphbi/iphbimigration.htm>
<5><Linux-installatie migreren van een iSeries naar een IBM eServer i5><iphbi/iphbimigratiseries.htm>
<5><Linux-installatie migreren van een pSeries naar een IBM eServer p5><iphbi/iphbimigratpseries.htm>
<4><Een partitieprofiel kopiëren><iphbl/iphblcopyprofile.htm>
<4><Een systeemprofiel maken><iphbl/iphblsysprofile.htm>
<4><Een systeemprofiel kopiëren><iphbl/iphblcopysysp.htm>
<4><Een logische partitie maken met behulp van de geïntegreerde virtuele I/O-server in i5/OS><iphbl/iphblioserverpartition.htm>
<3><Logische Linux-partities beheren><iphbi/iphbimanage.htm>
<4><Partitieprofielen beheren><iphbl/iphblmanagepprofile.htm>
<5><Een partitieprofiel activeren><iphbl/iphblactivate.htm>
<5><Een partitieprofiel wissen><iphbi/iphbldeleteprofile.htm>
<4><Systeemprofielen beheren><iphbl/iphblmanagesprofile.htm>
<5><Een systeemprofiel activeren><iphbl/iphblactivatesysprofile.htm>
<5><Een systeemprofiel wissen><iphbl/iphbldeletesysprofile.htm>
<4><Dynamisch beheer van resources voor logische partities><iphbi/iphbilinuxmanagedynamic.htm>
<5><Dynamisch beheer van fysieke I/O-apparaten><iphbi/iphbilinuxdlpario.htm>
<5><Dynamisch beheer van verwerkingscapaciteit><iphbi/iphbilinuxdlparprocpower.htm>
<4><Partities op afstand beheren><iphbl/iphblpartitionremote.htm>
<4><Beveiligingsbeheer voor logische partitie en besturingssysteem><iphbl/iphblsecuritylpar.htm>
<4><Toepassingsondersteuning><iphbi/iphbiappsupport.htm>
<5><Samba-ondersteuning voor i5/OS Netserver><iphbi/iphbinetserver.htm>
<5><Toegang tot i5/OS-gegevens met behulp van het Linux ODBC-stuurprogramma><iphbi/iphbiodbc.htm>
<4><Backups van een Linux-installatie maken en herstellen><iphbi/iphbibackup.htm>
<5><Logische partities beheren die gebruikmaken van de geïntegreerde virtuele I/O-server in i5/OS><iphbl/iphblmanagingkickoff.htm>
<5><Backups van Linux maken en herstellen op pSeries><iphbi/iphbibackuppseries.htm>
<3><Linux gebruiken op een logische partitie><iphbi/iphbilinuxuse.htm>
<4><Opnieuw starten en afsluiten van Linux op een logische partitie><iphbi/iphbishutdownlinux.htm>
<5><Opnieuw starten van logische Linux-partities><iphbi/iphbirestartlinux.htm>
<5><Afsluiten met behulp van de HMC><iphbi/iphbishutdownhmc.htm>
<3><Problemen met logische Linux-partities oplossen><iphbi/iphbitrouble.htm>
<3><Overige informatie over logische Linux-partities><iphbi/iphbirelated.htm>
# End of navigation data from: iphbi/iphbi02.xml
# Start of navigation data from: iphb1/iphb1toc.xml
<2><Virtuele I/O-server gebruiken><iphb1/iphb1kickoff.htm>
<3><Afdrukbare PDF's><iphb1/iphb1_vios_printthis.htm>
<3><Concepten voor de virtuele I/O-server><iphb1/iphb1_vios_concepts.htm>
<4><Opdrachtregelinterface van de virtuele I/O-server><iphb1/iphb1_vios_concepts_cli.htm>
<4><Typen gebruikers><iphb1/iphb1_vios_concepts_user.htm>
<4><Concepten voor virtuele netwerken><iphb1/iphb1_vios_concepts_network.htm>
<5><Inleiding tot virtuele netwerken><iphb1/iphb1_vios_concepts_network_intro.htm>
<5><Linkaggregatie><iphb1/iphb1_vios_concepts_network_lnagg.htm>
<5><VLAN's (Virtual Local Area Networks)><iphb1/iphb1_vios_concepts_network_vlan.htm>
<5><Virtuele Ethernet-adapters><iphb1/iphb1_vios_concepts_network_venet.htm>
<5><Gemeenschappelijke Ethernet-adapters><iphb1/iphb1_vios_concepts_network_sea.htm>
<4><Concepten voor virtuele SCSI><iphb1/iphb1_vios_concepts_stor.htm>
<5><Virtuele SCSI-apparatuurtypen><iphb1/iphb1_vios_concepts_stor_types.htm>
<5><Overzicht opslag logisch volume><iphb1/iphb1_vios_concepts_stor_lvovw.htm>
<5><Fysieke volumes><iphb1/iphb1_vios_concepts_stor_pv.htm>
<5><Volumegroepen><iphb1/iphb1_vios_concepts_stor_vg.htm>
<5><Fysieke partities><iphb1/iphb1_vios_concepts_stor_pp.htm>
<5><Logische partities><iphb1/iphb1_vios_concepts_stor_lp.htm>
<5><Quorums><iphb1/iphb1_vios_concepts_stor_quorum.htm>
<3><Scenario's voor de virtuele I/O-server><iphb1/iphb1_vios_scenarios.htm>
<4><Scenario: Configuratie van een virtuele I/O-server zonder VLAN-tagging><iphb1/iphb1_vios_scenarios_network_one.htm>
<4><Scenario: Configuratie van een virtuele I/O-server met VLAN-tagging><iphb1/iphb1_vios_scenarios_network_two.htm>
<4><Scenario: Configuratie van meerdere virtuele I/O-serverpartities zonder VLAN-tagging><iphb1/iphb1_vios_scenarios_novlan.htm>
<4><Scenario: Configuratie van meerdere virtuele I/O-serverpartities met VLAN-tagging><iphb1/iphb1_vios_scenarios_vlan.htm>
<3><Planning voor de virtuele I/O-server><iphb1/iphb1_vios_planning.htm>
<4><Capaciteitsplanning><iphb1/iphb1_vios_planning_cap.htm>
<4><Planning voor gemeenschappelijke Ethernet-adapter><iphb1/iphb1_vios_planning_network.htm>
<5><Netwerkvereisten><iphb1/iphb1_vios_planning_bandwidth.htm>
<5><Volumeaspecten voor gemeenschappelijke Ethernet-adapter><iphb1/iphb1_vios_planning_sea_sizing.htm>
<6><Adapterkeuze><iphb1/iphb1_vios_planning_sea_adapter.htm>
<6><Processortoewijzing><iphb1/iphb1_vios_planning_sea_procs.htm>
<6><Geheugentoewijzing><iphb1/iphb1_vios_planning_sea_memory.htm>
<4><Planning voor virtuele SCSI><iphb1/iphb1_vios_planning_vscsi.htm>
<5><Wachttijd virtuele SCSI><iphb1/iphb1_vios_planning_vscsi_latency.htm>
<5><Bandbreedte virtuele SCSI><iphb1/iphb1_vios_planning_vscsi_bandwidth.htm>
<5><Volumeaspecten voor virtuele SCSI><iphb1/iphb1_vios_planning_vscsi_sizing.htm>
<4><Overwegingen voor een hoge beschikbaarheid><iphb1/iphb1_vios_planning_ha.htm>
<5><Clientpartities><iphb1/iphb1_vios_planning_ha_client.htm>
<5><Partitie virtuele I/O-server><iphb1/iphb1_vios_planning_ha_server.htm>
<4><Beveiliging><iphb1/iphb1_vios_planning_sec.htm>
<4><Beperkingen><iphb1/iphb1_vios_planning_res.htm>
<3><De virtuele I/O-server installeren><iphb1/iphb1_vios_configuring.htm>
<4><De activeringscode van de virtuele I/O-server invoeren><iphb1/iphb1_vios_configuration_inputcode.htm>
<4><De logische partitie en het partitieprofiel maken voor de virtuele I/O-server><iphb1/iphb1_vios_configuring_partition.htm>
<4><De virtuele I/O-server installeren><iphb1/iphb1_vios_configuring_install.htm>
<5><De I/O-server vanaf de HMC installeren><iphb1/iphb1_vios_configuring_installhmc.htm>
<5><I/O-server installeren vanaf CD of DVD><iphb1/iphb1_vios_configuring_installcd.htm>
<3><De virtuele I/O-server beheren><iphb1/iphb1_vios_managing.htm>
<4><Typen gebruikers op de virtuele I/O-server beheren><iphb1/iphb1_vios_managing_users.htm>
<4><Gemeenschappelijke Ethernet-adapter beheren><iphb1/iphb1_vios_managing_sea.htm>
<5><Gemeenschappelijke Ethernet-adapter configureren><iphb1/iphb1_vios_configuring_sea.htm>
<5><Linkaggregatie configureren><iphb1/iphb1_vios_managing_lnagg.htm>
<5><Netwerkkenmerken><iphb1/iphb1_vios_managing_sea_attr.htm>
<4><Virtuele SCSI beheren><iphb1/iphb1_vios_managing_vscsi.htm>
<5><Het virtuele doelapparaat op de virtuele I/O-server maken><iphb1/iphb1_vios_managing_vscsi_targ.htm>
<5><Logische volumes en volumegroepen op de virtuele I/O-server maken><iphb1/iphb1_vios_managing_vscsi_vg.htm>
<5><Virtuele schijven koppelen aan fysieke schijven><iphb1/iphb1_vios_managing_mapping.htm>
<4><De virtuele I/O-server beheren><iphb1/iphb1_vios_managing_maintain.htm>
<5><Een volumegroep importeren of exporteren><iphb1/iphb1_vios_managing_vscsi_impexp.htm>
<5><De virtuele I/O-server bijwerken><iphb1/iphb1_vios_managing_updating.htm>
<5><Een backup van de virtuele I/O-server maken en deze herstellen><iphb1/iphb1_vios_backup.htm>
<6><Backup maken><iphb1/iphb1_vios_backup_backup.htm>
<7><Een backup op band maken><iphb1/iphb1_vios_backup_tape.htm>
<7><Een backup op een bestandssysteem op afstand maken><iphb1/iphb1_vios_backup_filesystem.htm>
<7><Een backup op CD of DVD maken><iphb1/iphb1_vios_backup_cddvd.htm>
<6><Herstellen><iphb1/iphb1_vios_backup_restore.htm>
<7><Herstellen vanaf band><iphb1/iphb1_vios_backup_restore_tape.htm>
<7><Herstellen vanaf een bestandssysteem op afstand><iphb1/iphb1_vios_backup_restore_file.htm>
<7><Herstellen vanaf CD of DVD><iphb1/iphb1_vios_backup_restore_cddvd.htm>
<5><De virtuele I/O-server bewaken><iphb1/iphb1_vios_managing_maintain_monitor.htm>
<3><Problemen met de virtuele I/O-server oplossen><iphb1/iphb1_vios_troubleshooting.htm>
<4><Problemen met de virtuele I/O-server><iphb1/iphb1_vios_troubleshooting_serv.htm>
<5><Problemen met de virtuele SCSI><iphb1/iphb1_vios_troubleshooting_serv_vscsi.htm>
<5><Problemen met netwerken><iphb1/iphb1_vios_troubleshooting_network.htm>
<4><Problemen met clientpartities><iphb1/iphb1_vios_troubleshooting_client.htm>
<3><Verwante informatie><iphb1/iphb1_vios_related.htm>
# End of navigation data from: iphb1/iphb1toc.xml
<2><Overige informatie><iphat/iphatlparrelated.htm>
# End of navigation data from: iphat/iphattoc.xml
<1><Besturingssystemen installeren><iphaw/kickoff.htm>
<2><AIX installeren><iphay/iphayinstallaix.htm>
<2><i5/OS installeren><iphax/iphaxinstallos400.htm>
<2><Linux installeren><iphaz/iphazinstalllinux.htm>
<3><Installatie van Linux voorbereiden><iphaz/iphazprepareforinstall.htm>
<3><Linux-distributie installeren><iphaz/iphazinstalldistro.htm>
<3><Extra software voor Linux installeren><iphaz/iphazinstallrpms.htm>
# Start of navigation data from: ipha1/ipha1toc.xml
<1><Server beheren><ipha1/kick.htm>
<2><Hardware Management Console><ipha1/hardwaremanagementconsolehmc.htm>
<3><Afdrukbare PDF's><ipha1/printablepdf.htm>
<3><HMC-concepten><ipha1/concepts.htm>
<4><Grafische gebruikersinterface van HMC><ipha1/hmcgraphicaluserinterface.htm>
<5><Navigatiegebied><ipha1/navigationarea.htm>
<5><Gegevensgebied><ipha1/contentsarea.htm>
<5><Menubalk><ipha1/menubar.htm>
<5><Werkbalk><ipha1/toolbar.htm>
<5><Statusbalk><ipha1/statusbar.htm>
<5><HMC-toepassingen><ipha1/hmcapps.htm>
<4><HMC-toegangscontrole><ipha1/managingusers.htm>
<5><Beheerde-resourcerollen><ipha1/resourcemanagement.htm>
<5><Taakrollen><ipha1/taskmanagement.htm>
<4><Overzicht van HMC-rollen><ipha1/overviewofroles.htm>
<5><Vooraf gedefinieerde HMC-rollen><ipha1/predefinedroles.htm>
<5><Aangepaste HMC-rollen><ipha1/defcustomrole.htm>
<4><Overzicht van HMC-taken><ipha1/overviewoftasksandroles.htm>
<5><HMC-configuratietaken><ipha1/syscon.htm>
<5><Taken voor HMC-gebruikersbeheer><ipha1/uman.htm>
<5><Taken voor profiel van beheerd systeem><ipha1/sysprof.htm>
<5><Taken voor beheerd systeem><ipha1/mansys.htm>
<5><Taken voor logische partities><ipha1/partitiontasks.htm>
<5><Taken voor Capacity on Demand><ipha1/cuodtasks.htm>
<5><Taken voor de Virtualization Engine-technologie><ipha1/vetasks.htm>
<5><Servicetaken><ipha1/problemdetermination.htm>
<5><Frametaken><ipha1/frametasks.htm>
<4><Werkstanden voor inschakelen van het beheerde systeem><ipha1/poweronmodes.htm>
<4><Statuswaarden voor het inschakelen van het beheerde systeem><ipha1/poweronstates.htm>
<4><Typen HMC-netwerkverbindingen><ipha1/netconhmc.htm>
<5><HMC met een netwerk verbinden><ipha1/connectingthehmctoanetwork.htm>
<5><Besloten en open netwerken in de HMC-omgeving><ipha1/privpubnetwork.htm>
<5><HMC gebruiken als DHCP-server><ipha1/hmcdhcpserver.htm>
<3><Werken met de HMC><ipha1/workingwiththehmc.htm>
<4><Aanmelden, afsluiten, opnieuw opstarten en afmelden op de HMC><ipha1/shutdownrestartlogout.htm>
<5><Aanmelden op de HMC><ipha1/poweron.htm>
<5><Afsluiten, opnieuw opstarten en afmelden van de HMC><ipha1/reboot.htm>
<4><HMC-beheeromgeving configureren><ipha1/configuringyourhmcmanagementenvironment.htm>
<5><Netwerkverbindingen testen><ipha1/testingnetworkconnectivity.htm>
<5><Client op afstand installeren en gebruiken><ipha1/usingtheremoteclient.htm>
<5><Werken met de HMC-machinecode><ipha1/scndupgrd.htm>
<5><Taal en locale van de HMC-interface wijzigen><ipha1/changingtheinterfacelanguage.htm>
<5><Toetsenbordindeling configureren><ipha1/configkeyboardlayout.htm>
<5><Regel voor opdrachten op afstand van de HMC gebruiken><ipha1/usingtheremotecommandline.htm>
<6><Gegevens van de opdracht op afstand voor de HMC bekijken><ipha1/viewingremcom.htm>
<6><Beveiligde scriptuitvoering tussen SSH-clients en de HMC instellen><ipha1/settingupsecurescriptexecutionsbetweensshclientsandthehmc.htm>
<6><Opdrachten op afstand voor de HMC in- en uitschakelen><ipha1/enablinganddisablingremotecommands.htm>
<4><Toegang tot de ASMI met de HMC><ipha1/accessingasmi.htm>
<4><Recente HMC-activiteiten bekijken><ipha1/viewingrecenthmcactivity.htm>
<4><Partitieprofielgegevens beheren><ipha1/backingupandrestoringprofileinformation.htm>
<5><Backup maken van profielgegevens><ipha1/backupprofdata.htm>
<5><Profielgegevens initialiseren><ipha1/initializeprofdata.htm>
<5><Profielgegevens herstellen><ipha1/restoreprofdata.htm>
<5><Profielgegevens verwijderen><ipha1/removeprofdata.htm>
<4><Backup maken van de HMC en deze weer herstellen><ipha1/backingupthehmc.htm>
<5><Backup maken van essentiële HMC-gegevens><ipha1/backingupcriticalconsoledata.htm>
<5><Essentiële HMC-gegevens herstellen><ipha1/restoringcriticalconsoledata.htm>
<6><Herstellen vanaf DVD><ipha1/restoredvd.htm>
<6><Gegevens herstellen vanaf een server op afstand><ipha1/restoreremotesys.htm>
<5><Geplande HMC-backups plannen en bekijken><ipha1/schedulingandreviewingscheduledbackups.htm>
<5><HMC-upgradegegevens opslaan><ipha1/savingupgradedata.htm>
<5><HMC-machinecode opnieuw installeren><ipha1/recoveringthehmc.htm>
<4><HMC-machinecode opnieuw installeren><ipha1/recoveringthehmc.htm>
<4><Beveiliging beheren op de HMC><ipha1/managingsecurityonyourhmc.htm>
<5><Een gebruiker maken><ipha1/creatingusers.htm>
<5><Aangepaste HMC-rol maken><ipha1/customroles.htm>
<5><Gebruikersinformatie en rollen bewerken><ipha1/editinguserinformationandroles.htm>
<5><Gebruikersinformatie kopiëren><ipha1/copyingusers.htm>
<5><Gebruikersbeschrijvingen bekijken><ipha1/viewinguserdefinitions.htm>
<5><Een gebruiker wissen><ipha1/deletingauser.htm>
<5><HMC-gebruikerswachtwoorden wijzigen><ipha1/changingpasswords.htm>
<5><Wachtwoord voor het beheerde systeem wijzigen><ipha1/updatepassword.htm>
<3><Werken met beheerde systemen en frames><ipha1/workingwithmanagedsystemsusingyourhmc.htm>
<4><Het beheerde systeem in- en uitschakelen><ipha1/poweringonandoffyourmanagedsystem.htm>
<5><Het beheerde systeem inschakelen><ipha1/poweringonthemanagedsystem.htm>
<5><Het beheerde systeem uitschakelen><ipha1/poweringoffthemanagedsystem.htm>
<5><In- en uitschakelingsacties plannen voor het beheerde systeem><ipha1/schedulingmanagedsystempower.htm>
<4><Het beheerde systeem openen><ipha1/accessingyourmanagedsystem.htm>
<5><Overzicht van wachtwoorden><ipha1/overviewofthepasswords.htm>
<5><Virtuele besturingssysteemconsoles><ipha1/virtualoperatingsystemconsoles.htm>
<6><Controleren of de consoles zijn geconfigureerd><ipha1/checktoseeifconsolesareconfigured.htm>
<6><5250-console><ipha1/fiftytwofifty.htm>
<7><De logische partitie voorbereiden voor verbinding><ipha1/settingup5250.htm>
<7><Verbinding met een 5250-console maken><ipha1/connecting5250.htm>
<8><Lokale verbinding met een 5250-console maken><ipha1/local5250.htm>
<8><Verbinding op afstand met een 5250-console maken><ipha1/remote5250.htm>
<6><Virtuele terminal><ipha1/virtualterminal.htm>
<5><Functies bedieningspaneel><ipha1/virtualcontrolpanel.htm>
<4><Gegevens over de beheerde systemen zoeken><ipha1/findingdataaboutyourmanagedsystems.htm>
<5><Informatie over een beheerd systeem bekijken><ipha1/viewinginformationaboutamanagedsystem.htm>
<5><Informatie over een beheerd systeem bijwerken><ipha1/updatingmanagedsysteminformationdisplayedinthecontentsarea.htm>
<5><Het beheerde systeem wissen><ipha1/deletingthemanagedsystemfromthecontentsarea.htm>
<5><Een andere HMC-verbinding verbreken><ipha1/releasinganhmclockonamanagedsystem.htm>
<4><Het frame beheren met behulp van de HMC><ipha1/managingyourframe.htm>
<5><Een frame toevoegen><ipha1/addframe.htm>
<5><Het frame initialiseren><ipha1/initializeframe.htm>
<5><Informatie over het frame wijzigen><ipha1/viewingproperties.htm>
<5><Frame-informatie bijwerken><ipha1/rebuildframe.htm>
<5><Een frameverbinding herstellen of verwijderen><ipha1/resetremoveconnection.htm>
<4><Partitiegegevens op een beheerd systeem herstellen><ipha1/recoverpartitiondata.htm>
<4><Besturingssystemen beheren><ipha1/managingresourcesonamanagedsystem.htm>
<5><Het besturingssysteem op een partitie opnieuw instellen><ipha1/resetoslpar.htm>
<5><Een besturingssysteem afsluiten><ipha1/shutdownos.htm>
<4><Beheerde systemen aan de HMC-omgeving toevoegen><ipha1/addingmanagedsystems.htm>
<4><Beheerd systeem verplaatsen van een openbaar netwerk naar een besloten netwerk><ipha1/movetoprivate.htm>
<4><Een bestaand netwerk uitbreiden><ipha1/usingexisting.htm>
<5><Een bestaand besloten netwerk gebruiken waarbij de HMC als DHCP-server fungeert><ipha1/usinganexisting.htm>
<5><Een bestaand open netwerk gebruiken><ipha1/usinganexistingopen.htm>
<4><Het beheerde systeem onderhouden><ipha1/servicingyourmanagedsystem.htm>
<3><Overige informatie><ipha1/relatedinformation.htm>
# Start of navigation data from: iphbp/iphbptoc.xml
<2><Advanced System Management Interface><iphbp/kickoff.htm>
<3><Afdrukbare PDF><iphbp/printablepdf.htm>
<3><Concepten><iphbp/genconcepts.htm>
<4><ASMI-vereisten><iphbp/requirements.htm>
<4><ASMI-machtigingsniveaus><iphbp/asmiauthority.htm>
<4><ASMI-aanmeldbeperkingen><iphbp/asmilogin.htm>
<3><Aanmeldprofiel instellen><iphbp/loginprofile.htm>
<4><Wachtwoord wijzigen><iphbp/chgpwd.htm>
<4><Aanmeldaudits terughalen><iphbp/loginaudit.htm>
<4><Standaardtaal wijzigen><iphbp/defaultlang.htm>
<4><Geïnstalleerde talen bijwerken><iphbp/updatelang.htm>
<3><Systeemgegevens bekijken><iphbp/viewsysinfo.htm>
<4><VPD (Vital Product Data) bekijken><iphbp/viewvpd.htm>
<4><Permanente opslag bekijken><iphbp/viewpersistent.htm>
<4><SPCN-traceergegevens bekijken><iphbp/viewsyspctrace.htm>
<4><Voortgangsindicatie van vorige opstartprocedure bekijken><iphbp/lastsysboot.htm>
<4><Historie voortgangsindicatie bekijken><iphbp/viewsystrace.htm>
<3><Netvoeding van het systeem regelen><iphbp/usingsyspc.htm>
<4><Systeem aan- en uitzetten><iphbp/poweronoff.htm>
<4><Automatisch herstarten instellen><iphbp/autopower.htm>
<4><Onmiddellijk uitschakelen><iphbp/fastoff.htm>
<4><Een opstartprocedure voor het systeem uitvoeren><iphbp/sysreboot.htm>
<4><Wake-on LAN instellen><iphbp/remotepower.htm>
<3><Systeemconfiguratie wijzigen><iphbp/viewsysconfig.htm>
<4><Systeemnaam wijzigen><iphbp/systemname.htm>
<4><Verwerkingseenheid-ID wijzigen><iphbp/viewcec.htm>
<4><I/O-behuizingen configureren><iphbp/configio.htm>
<4><Datum en tijd wijzigen><iphbp/viewtime.htm>
<4><Updatebeleid voor firmware wijzigen><iphbp/codesource.htm>
<4><PCI-fouteninjectiebeleid inschakelen><iphbp/pcierrorinject.htm>
<4><Bewaking configureren><iphbp/confmonitor.htm>
<4><HMC-verbinding verbreken><iphbp/disconnecthmc.htm>
<4><Interposer plug count wijzigen><iphbp/interplugcount.htm>
<4><Het aantal HSL Opticonnect-verbindingen wijzigen><iphbp/hslconnect.htm>
<4><Geheugentoewijzing I/O-adapter inschakelen><iphbp/ioadapter.htm>
<4><Hardware deconfigureren><iphbp/hardwaredeconfig.htm>
<5><Deconfiguratiebeleid instellen><iphbp/viewdeconfig.htm>
<5><Processorconfiguratie wijzigen><iphbp/viewprocconfig.htm>
<5><Geheugenconfiguratie wijzigen><iphbp/viewmemconfig.htm>
<5><Alle deconfiguratiefouten wissen><iphbp/cleardeconfig.htm>
<4><VPD (Vital Product Data) programmeren><iphbp/programvpd.htm>
<5><Merk van het systeem instellen><iphbp/systembrand.htm>
<5><Systeem-ID's instellen><iphbp/systemkeywords.htm>
<5><Behuizingstype van het systeem instellen><iphbp/systemenclosures.htm>
<4><Service-indicators wijzigen><iphbp/serviceindicators.htm>
<5><Attentie-indicator van het systeem uitschakelen><iphbp/sysattn.htm>
<5><Behuizingsindicator inschakelen><iphbp/enclosureindicators.htm>
<5><Indicators per locatiecode wijzigen><iphbp/viewbylocation.htm>
<5><LED-test op het bedieningspaneel uitvoeren><iphbp/lamptest.htm>
<3><Opties voor betere prestaties instellen><iphbp/perfoptions.htm>
<4><Grootte logische geheugenblok wijzigen><iphbp/logicalmem.htm>
<4><Werkstand voor cachevergrendeling inschakelen><iphbp/cachelocking.htm>
<3><Netwerkservices configureren><iphbp/networkservices.htm>
<4><Netwerkinterfaces configureren><iphbp/networkconfig.htm>
<4><Netwerktoegang configureren><iphbp/networkaccess.htm>
<4><Foutopsporing virtuele TTY><iphbp/debugvirtualtty.htm>
<3><On-demand-functies gebruiken><iphbp/ondemandutil.htm>
<4><Capacity on Demand bestellen><iphbp/cuodinfo.htm>
<4><Capacity on Demand activeren><iphbp/cuodactivation.htm>
<4><Serverfirmware hervatten na activering van CoD><iphbp/cuodrecovery.htm>
<4><Capacity on Demand-opdrachten gebruiken><iphbp/cuodcmd.htm>
<3><Functies voor onderhoud zonder interruptie gebruiken><iphbp/concurrentmaint.htm>
<4><Netvoeding van IDE-apparatuur regelen><iphbp/viewidectrl.htm>
<4><Het bedieningspaneel gereedmaken><iphbp/opanelmaint.htm>
<3><Systeemproblemen oplossen met servicehulpmiddelen><iphbp/usingsysservaid.htm>
<4><Fouten- en eventlogboeken afbeelden><iphbp/displayerrlog.htm>
<4><Detectie op seriële poorten inschakelen><iphbp/serialportsnoop.htm>
<4><Platformdump starten><iphbp/platformdump.htm>
<4><Serviceprocessordump starten><iphbp/spdump.htm>
<4><Instellingen voor seriële poorten configureren><iphbp/serialportsetup.htm>
<4><Modem configureren><iphbp/configmodem.htm>
<4><Beleid voor servicenummer bellen en inbellen configureren><iphbp/callhomesetup.htm>
<4><Beleid voor servicenummer bellen testen><iphbp/callhometest.htm>
<4><De serviceprocessor herstarten><iphbp/rebootfsp.htm>
<4><Fabrieksinstellingen van de server herstellen><iphbp/factorysettings.htm>
# End of navigation data from: iphbp/iphbptoc.xml
<2><Operations Console><ipha1/opsconsole.htm>
<2><Twinaxconsole><ipha1/twinax.htm>
# End of navigation data from: ipha1/ipha1toc.xml
# Start of navigation data from: ipha2/ipha2toc.xml
<1><Werken met Capacity on Demand><ipha2/kickoff.htm>
<2><Nieuw><ipha2/whatnew.htm>
<2><Afdrukbare PDF's><ipha2/print.htm>
<2><Voorbereiden voor Capacity on Demand><ipha2/codprep.htm>
<3><Planning voor Capacity on Demand><ipha2/cuodplancapacity.htm>
<3><Bepalen wanneer resources moeten worden geactiveerd><ipha2/cuodplannumprocs.htm>
<3><De omgeving instellen voor CoD><ipha2/cuodplansetup.htm>
<3><Aandachtspunten bij softwarelicenties><ipha2/cuodconswlic.htm>
<2><Werken met Capacity Upgrade on Demand><ipha2/cuod.htm>
<3><Concepten><ipha2/cuodconparent.htm>
<4><Processors en geheugeneenheden><ipha2/cuodconproc.htm>
<4><Activeringscodes><ipha2/cuodconpodact.htm>
<3><Activeringsfuncties bestellen voor Capacity Upgrade on Demand><ipha2/cuodorder.htm>
<3><Capacity Upgrade on Demand gebruiken><ipha2/cuoduse.htm>
<4><Resources definitief activeren><ipha2/cuodactpermcap.htm>
<4><Instellingen voor resources van CoD afbeelden><ipha2/cuoddisplayresources.htm>
<4><CoD-codegeneratiegegevens afbeelden en opslaan><ipha2/cuodviewsave.htm>
<2><Werken met Trial Capacity on Demand><ipha2/tcod.htm>
<3><Beginnen met Trial Capacity on Demand><ipha2/tcodorder.htm>
<3><Instellingen voor resources van CoD afbeelden><ipha2/tcoddisplayresources.htm>
<3><CoD-codegeneratiegegevens afbeelden en opslaan><ipha2/tcodviewsave.htm>
<3><Trial Capacity on Demand beëindigen><ipha2/tcodend.htm>
<2><Werken met On/Off Capacity on Demand><ipha2/oocod.htm>
<3><Concepten><ipha2/onoffcodconcepts.htm>
<4><Processor- of geheugendagen><ipha2/onoffcodconprocdays.htm>
<4><Inschakelingscode voor On/Off CoD><ipha2/onoffcodconenable.htm>
<4><Facturering voor On/Off Capacity on Demand><ipha2/onoffcodconbill.htm>
<3><On/Off Capacity on Demand inschakelen><ipha2/onoffcodenable.htm>
<4><De inschakelingscode voor On/Off CoD aanvragen en invoeren><ipha2/onoffcodenableobtain.htm>
<4><Instellingen voor het maandelijks verzenden van gegevens naar IBM><ipha2/onoffcodenablereport.htm>
<3><On/Off Capacity on Demand gebruiken><ipha2/onoffcoduse.htm>
<4><Resources tijdelijk activeren voor de server><ipha2/onoffcodenablerequest.htm>
<4><Instellingen voor resources van CoD afbeelden><ipha2/onoffcodusedisplay.htm>
<4><CoD-gegevens afbeelden en opslaan><ipha2/onoffcoduseviewinfo.htm>
<4><Een aanvraag voor On/Off CoD beëindigen><ipha2/onoffcodusestoprequest.htm>
<4><On/Off Capacity on Demand onderbreken><ipha2/onoffcodend.htm>
<2><Werken met Reserve Capacity on Demand><ipha2/rcod.htm>
<3><Concepten><ipha2/reservecodconcepts.htm>
<4><Processordagen><ipha2/reservecodconprocdays.htm>
<4><Functie en code voor prepaid reservecapaciteit><ipha2/reservecodconenable.htm>
<3><Reserve Capacity on Demand inschakelen><ipha2/reservecodenable.htm>
<3><Reserve Capacity on Demand gebruiken><ipha2/reservecoduse.htm>
<4><Instellingen van Reserve CoD-processors bekijken><ipha2/reservecodusedisplay.htm>
<4><Informatie over gemeenschappelijke processors bekijken><ipha2/reservecodusesharedprocpool.htm>
<4><CoD-codegeneratiegegevens afbeelden en opslaan><ipha2/rcodviewsave.htm>
<2><Werken met Capacity BackUp><ipha2/cbu.htm>
<3><Processors beschikbaar voor Capacity BackUp><ipha2/cbuprocs.htm>
<3><Aandachtspunten bij softwarelicenties voor Capacity BackUp><ipha2/cbuswlicense.htm>
<2><Overige publicaties><ipha2/relatedinfo.htm>
# End of navigation data from: ipha2/ipha2toc.xml
# Start of navigation data from: ipha3/ipha3toc.xml
<1><Problemen Oplossen><ipha3/kickoff.htm>
<2><Nieuwe functies><ipha3/whatsnew.htm>
<2><Afdrukbare PDF><ipha3/printablepdf.htm>
<2><Problemen beheren><ipha3/howservermanages.htm>
<2><Problemen vaststellen><ipha3/detecting.htm>
<3><Overzicht waarschuwingslampje><ipha3/attention_lights.htm>
<3><Overzicht van berichten><ipha3/messages_overview.htm>
<3><Overzicht van referentiecodes><ipha3/reference_codes_overview.htm>
<2><Problemen analyseren en oplossen><ipha3/analyzing.htm>
<3><Probleemanalyse starten><ipha3/begin_pa.htm>
<4><AIX-probleemanalyse><ipha3/aix_problem_analysis.htm>
<4><i5/OS-probleemanalyse><ipha3/os400_problem_analysis.htm>
<4><Linux-probleemanalyse><ipha3/linux_problem_analysis.htm>
<3><Referentiecodes verzamelen><ipha3/collectsrc.htm>
<3><Lijst met referentiecodes><ipha3/referencecodes.htm>
<4><HMC-foutcodes><ipha3/hmc_codes.htm>
<5><0xxxxx><ipha3/hmc_codes_0.htm>
<5><HSCE xxxx><ipha3/hmc_codes_hsce.htm>
<5><HSCI xxxx><ipha3/hmc_codes_hsci.htm>
<5><HSCL xxxx><ipha3/hmc_codes_hscl.htm>
<5><HSCP xxxx><ipha3/hmc_codes_hscp.htm>
<5><HSCS xxxx><ipha3/hmc_codes_hscs.htm>
<4><SRN-codes><ipha3/srn_codes.htm>
<3><Ondersteunende diagnoseprogramma's><ipha3/supporting_diagnostics.htm>
<4><Online en zelfstandige diagnoseprogramma's><ipha3/aix_diagnostics.htm>
<5><Online diagnoseprogramma's><ipha3/online_procedure.htm>
<6><Servicewerkstand><ipha3/service_mode.htm>
<6><Onderhoudswerkstand><ipha3/maintenance_mode.htm>
<6><Synchroonwerkstand><ipha3/concurrent_mode.htm>
<5><Zelfstandige diagnoseprogramma's op CD><ipha3/standalone_procedure.htm>
<5><Zelfstandige diagnoseprogramma's op een NIM-server><ipha3/standalone_nim.htm>
<4><Langzame opstartprocedure uitvoeren><ipha3/slow_boot.htm>
<4><Dumps uitvoeren><ipha3/mainstoragedump.htm>
<5><Platform- en SP-dumps><ipha3/platform_dump.htm>
<5><i5/OS-hoofdgeheugendumps><ipha3/main_dump.htm>
<5><Dumps beheren><ipha3/manage_dumps.htm>
<6><Dumps kopiëren><ipha3/copy_platform.htm>
<6><Dumps rapporteren><ipha3/report_msd.htm>
<6><Dumps wissen><ipha3/delete_msd.htm>
<4><De primaire of alternatieve consoles vaststellen><ipha3/determine_console.htm>
<4><Status van het beheerde systeem corrigeren><ipha3/managedsystemstates.htm>
<4><Serviceprocessor opnieuw instellen><ipha3/reset_sp.htm>
<4><Verbinding met het beheerde systeem opnieuw instellen met behulp van de HMC><ipha3/reset_connection.htm>
<4><Zoeken naar IP-conflicten><ipha3/ip_conflict.htm>
<3><Berichten bekijken><ipha3/view_messages.htm>
<4><AIX-berichten><ipha3/view_aix_mess.htm>
<4><HMC-berichten><ipha3/view_hmc_messages.htm>
<4><i5/OS-berichten><ipha3/view_os400_mess.htm>
<4><Linux-berichten><ipha3/view_linux_messages.htm>
<3><Service Focal Point gebruiken><ipha3/sfp.htm>
<4><Service-events bekijken><ipha3/viewevents.htm>
<4><Service-events afsluiten><ipha3/closeevent.htm>
<4><Service-events repareren><ipha3/repairevent.htm>
<5><Informatie over service-eventpartitie bekijken><ipha3/vieweventpartition.htm>
<4><LED's activeren en deactiveren><ipha3/fru_leds.htm>
<4><Verbindingsbewaking instellen><ipha3/setup.htm>
<3><Onderdelen vervangen en controleren><ipha3/verifying_the_repair.htm>
<2><Problemen rapporteren><ipha3/reporting.htm>
<3><Formulieren voor probleemrapportage><ipha3/problem_forms.htm>
<3><Contact opnemen met de technische ondersteuning van IBM><ipha3/contacting_support.htm>
<2><Overige informatie><ipha3/related.htm>
# End of navigation data from: ipha3/ipha3toc.xml
# Start of navigation data from: ipha5/ipha5toc.xml
<1><Service en ondersteuning><ipha5/kickoff.htm>
<2><Klantenservice en -ondersteuning><ipha5/customersvcsupport.htm>
<3><Nieuwe functies><ipha5/whatnew.htm>
<3><Afdrukbare PDF><ipha5/printablepdf.htm>
<3><Overzicht><ipha5/overview.htm>
<4><Elementen van uw serviceomgeving><ipha5/elements.htm>
<5><Connectiviteit><ipha5/connectivity.htm>
<5><Servicegegevens><ipha5/inventory.htm>
<5><Elektronische probleemrapportage><ipha5/electronicpbmreport.htm>
<5><Fixes><ipha5/introfixes.htm>
<5><Ondersteuning op afstand><ipha5/introremotesupport.htm>
<4><Inleiding tot de servicetoepassingen><ipha5/intro2.htm>
<5><Electronic Service Agent><ipha5/electronicserviceagent.htm>
<5><Remote Support Facility><ipha5/remotesupportfacility.htm>
<5><Service Focal Point><ipha5/servicefocalpoint.htm>
<4><Overzicht van servicetoepassingen en -functies><ipha5/mapsvcappsfunc.htm>
<3><Scenario's><ipha5/scenarios.htm>
<4><Scenario's: AIX><ipha5/aixscenarios.htm>
<5><Scenario: Verschillende logische partities in AIX met een HMC><ipha5/aixmultiple.htm>
<5><Scenario: Verschillende servers die gebruikmaken van AIX zonder een HMC><ipha5/aixwohmc.htm>
<4><Scenario's: i5/OS><ipha5/os400scenarios.htm>
<5><Scenario: Verschillende i5/OS-partities die VPN gebruiken op een i5/OS-partitie><ipha5/os400multiplevpn.htm>
<5><Scenario: Verschillende i5/OS-partities die de HMC-modem gebruiken><ipha5/os400multiplehmc.htm>
<5><Scenario: Verschillende i5/OS-partities die de modem op een i5/OS-partitie gebruiken><ipha5/os400multiplemodemonpartition.htm>
<5><Scenario: Verschillende i5/OS-partities die de HMC-modem en de modem op een i5/OS-partitie gebruiken><ipha5/os400multiplebothmodems.htm>
<5><Scenario: i5/OS zonder een HMC die VPN gebruikt><ipha5/os400wohmc.htm>
<4><Scenario: Linux><ipha5/linuxscenarios.htm>
<5><Scenario: Linux zonder een HMC><ipha5/linuxwohmc.htm>
<3><Uw serviceomgeving instellen><ipha5/settingup.htm>
<4><De configuratiewizard gebruiken om uw HMC in te stellen><ipha5/useguidedsetup.htm>
<4><Netwerkverbindingen voor uw serviceomgeving><ipha5/networking.htm>
<4><De HMC instellen om een verbinding te maken met uw serviceprovider><ipha5/setuphmcconnect.htm>
<5><Verbindingsmethode kiezen><ipha5/choosemethod.htm>
<5><Contact- en accountgegevens van uw bedrijf opgeven><ipha5/contactnconnect.htm>
<5><Opties voor verbindingsbewaking opgeven><ipha5/lanoption.htm>
<5><Electronic Service Agent op uw HMC configureren><ipha5/configesa.htm>
<6><Opgeven wanneer en hoe ESA informatie verzendt><ipha5/whennhowesa.htm>
<6><Berichten voor service-events instellen><ipha5/notificationsvcevents.htm>
<6><Uw systeeminformatie op internet bekijken><ipha5/viewinfoesa.htm>
<4><De server instellen om een verbinding te maken met uw serviceprovider><ipha5/setupsvrtoconnect.htm>
<5><AIX instellen om een verbinding te maken met uw serviceprovider><ipha5/setupaixpartition.htm>
<5><i5/OS instellen om een verbinding te maken met uw serviceprovider><ipha5/setupos400partition.htm>
<6><i5/OS instellen om een verbinding te maken met behulp van VPN><ipha5/os400connectvpn.htm>
<6><i5/OS instellen om een verbinding te maken met behulp van de modem op de server><ipha5/os400connectmodem.htm>
<6><i5/OS instellen om een verbinding te maken met behulp van de HMC><ipha5/os400connecthmc.htm>
<5><Linux instellen om een verbinding te maken met uw serviceprovider><ipha5/setuplinuxpartition.htm>
<5><De serviceprocessor instellen om een verbinding te maken met uw serviceprovider><ipha5/serviceprocessorconnect.htm>
<4><De verbinding testen><ipha5/testingconnection.htm>
<5><Werken met HMC><ipha5/testhmcconn.htm>
<5><Werken met i5/OS><ipha5/testos400conn.htm>
<5><Werken met AIX><ipha5/testaixconn.htm>
<5><Werken met Linux><ipha5/testlinuxconn.htm>
<3><Uw service-instellingen aanpassen><ipha5/customizing.htm>
<4><Opgeven wanneer en hoe u informatie verzendt><ipha5/whennhowesa.htm>
<4><Berichten voor service-events instellen><ipha5/notificationsvcevents.htm>
<4><Uw systeeminformatie op internet bekijken><ipha5/viewinfoesa.htm>
<4><Opties voor verbindingsbewaking opgeven><ipha5/lanoption.htm>
<3><Problemen rapporteren><ipha5/reporting.htm>
<4><Problemen rapporteren als de HMC niet beschikbaar is><ipha5/reporthmcdown.htm>
<4><Problemen rapporteren als de server niet functioneert.><ipha5/reportserverdown.htm>
<3><Fixes ophalen><ipha5/fixes.htm>
<4><HMC-fixes><ipha5/fixeshmc.htm>
<4><Firmwarefixes (LIC)><ipha5/fixesserverfirmware.htm>
<5><Concepten><ipha5/fixfirmwareconcepts.htm>
<6><Repositorylocaties><ipha5/repositorylocations.htm>
<6><Firmwareniveaus (LIC)><ipha5/firmwarelevels.htm>
<6><Tijdelijke en permanente zijde van de serviceprocessor><ipha5/t_side_p_side.htm>
<6><Waar vindt u informatie over fixes><ipha5/infoaboutfixes.htm>
<5><Scenario's: Fixes voor firmware (LIC)><ipha5/fixfirmwarescenarios.htm>
<6><Firmwarefixes voor server en voedingssubsysteem ophalen met behulp van een HMC><ipha5/fixfirmscenhmc.htm>
<6><Fixes voor serverfirmware ophalen zonder een HMC><ipha5/fixfirmscennohmc.htm>
<6><Fixes voor serverfirmware ophalen via i5/OS en een met HMC beheerd systeem><ipha5/fixfirmscenhmcopsys.htm>
<6><Firmwarefixes voor I/O-adapters en -apparatuur ophalen met een HMC (AIX)><ipha5/fixiofirmscenhmc.htm>
<6><Firmwarefixes voor I/O-adapters en -apparatuur ophalen zonder een HMC><ipha5/fixiofirmscennohmc.htm>
<5><Fixes voor firmware (LIC) beheren><ipha5/fixfirmwaremanage.htm>
<6><Bestaande niveaus van de firmware (LIC) bekijken><ipha5/viewexistlevel.htm>
<6><Beschikbare niveaus van de firmware (LIC) bekijken><ipha5/viewavaillevels.htm>
<6><Begeleidende brief bij de fix bekijken><ipha5/viewfixcoverletter.htm>
<6><Huidige niveau van de firmware (LIC) verwijderen><ipha5/removecurrentlevel.htm>
<6><Verkrijgen van een serverfirmwarefix op optische media><ipha5/get_fix_media.htm>
<6><Specifieke fix voor de firmware (LIC) ophalen><ipha5/getspecificfix.htm>
<6><Fix voor firmware (LIC) permanent installeren><ipha5/install_fix_permanently.htm>
<6><Upgraden naar een nieuwe release van de firmware (LIC)><ipha5/upgrade_to_new_ga.htm>
<6><Service- en productivity-tools verkrijgen voor Linux><ipha5/obtain_service_tools.htm>
<5><Problemen met fixes voor de firmware (LIC) oplossen><ipha5/troubleshooting_firm.htm>
<6><In de systeemgegevens zijn alleen nullen te zien><ipha5/all_zeros.htm>
<6><Voorheen met HMC beheerde server><ipha5/previous_hmc.htm>
<4><Fixes voor het besturingssysteem><ipha5/fixesoperatingsystems.htm>
<3><Ondersteuning op afstand inschakelen><ipha5/remotesupport.htm>
<4><Methoden voor ondersteuning op afstand><ipha5/remotesupportmethods.htm>
<4><Ondersteuning op afstand op de HMC inschakelen><ipha5/enableremotesupporthmc.htm>
<4><Ondersteuning op afstand zonder een HMC inschakelen><ipha5/enableremotesupportwohmc.htm>
<3><Overige informatie><ipha5/related.htm>
# Start of navigation data from: iphau/iphautoc.xml
<2><Service provider information><iphau/kickoff.htm>
<3><What's new><iphau/whatsnew.htm>
<3><Printable PDF><iphau/printing.htm>
<3><Start of call procedure><iphau/starthere.htm>
<4><Symptom index><iphau/symptomlist.htm>
<3><Detecting problems><iphau/detecting.htm>
<4><i5/OS problem determination><iphau/probdeterminationos400.htm>
<5><Using the Service Action Log (SAL)><iphau/usingsal.htm>
<5><Using the Product Activity Log (PAL)><iphau/usingpal.htm>
<5><Using the problem log><iphau/usingproblog.htm>
<4><AIX or Linux problem determination><iphau/probdetermination.htm>
<4><System unit problem determination><iphau/sysunitprobdetermination.htm>
<4><HMC machine code problem determination><iphau/hmcsoftprobdet.htm>
<3><Analyzing problems><iphau/analyzing.htm>
<4><Problems with loading and starting the operating system (AIX and Linux)><iphau/bootprb.htm>
<4><Problems with noncritical resources><iphau/noncritical.htm>
<4><Intermittent problems><iphau/intermittent.htm>
<5><About intermittent problems><iphau/imitabout.htm>
<5><General intermittent problem checklist><iphau/imitchecklist.htm>
<5><Analyzing intermittent problems><iphau/imitanalyzing.htm>
<5><Intermittent symptoms><iphau/imitsymptoms.htm>
<5><Failing area intermittent isolation procedures><iphau/imitintpips.htm>
<4><IPL problems><iphau/iplprob.htm>
<5><Cannot perform IPL from the control panel (no reference code)><iphau/noiplcontrolpanel.htm>
<5><Cannot perform IPL at a specified time (no reference code)><iphau/noiplspectime.htm>
<5><Cannot automatically perform IPL after a power failure><iphau/noiplpowerfail.htm>
<4><Power problems><iphau/powerprob.htm>
<5><Cannot power on system unit><iphau/pwrpsystemon.htm>
<5><Cannot power on I/O expansion unit><iphau/pwrpsecondaryon.htm>
<5><Cannot power off system or I/O expansion unit><iphau/pwrpoff.htm>
<3><Reference codes><ipha6/kickoff.htm>
<4><List of system reference codes><ipha6/refcodelist.htm>
<4><Using system reference codes><ipha6/usingsrcs.htm>
<4><List of service request numbers><ipha6/srnsmain.htm>
<4><Using service request numbers><ipha6/srnsusing.htm>
<4><List of progress codes><ipha6/progcodesmain.htm>
<4><Using progress codes><ipha6/progcodesusing.htm>
<3><Isolating problems><iphau/isolating.htm>
<4><Isolation procedures><iphau/pips.htm>
<5><Bus, RIO/HSL><iphau/pipbus.htm>
<6><Breaking down a RIO/HSL or PCI bus reference code><iphau/pipbusbreakrc.htm>
<6><DSA translation><iphau/pipbusdsabdown.htm>
<6><Card positions><iphau/pipbuscardpos.htm>
<6><Converting the loop number to NIC port location labels><iphau/pipbuslooptonic.htm>
<6><PCI bus isolation using AIX, Linux, or the HMC><iphau/pipbusaixhmc.htm>
<6><Verifying an HSL, bus, or multi-adapter bridge repair><iphau/pipbusverifying.htm>
<6><HSL loop configuration and status form><iphau/fmhslform.htm>
<6><Installed features in a PCI bridge set form><iphau/fmpciinstalled.htm>
<6><RIO/HSL link status diagnosis form><iphau/fmhsldiagchart.htm>
<5><Communication><iphau/pipcomm.htm>
<5><Disk unit><iphau/pipdiskunit.htm>
<5><I/O processor (IOP)><iphau/pipsdiop.htm>
<5><Intermittent isolation procedures><iphau/pipint.htm>
<5><Licensed internal code (LIC)><iphau/piplic.htm>
<5><Logical partition><iphau/piplpar.htm>
<5><Operations Console><iphau/opcip.htm>
<5><Power><iphau/pippower.htm>
<5><Routers><iphau/piprtr.htm>
<5><Service processor><iphau/pipsp.htm>
<5><Tape unit isolation procedures><iphau/piptape.htm>
<5><Twinaxial workstation I/O processor><iphau/piptwinaxial.htm>
<5><Workstation adapter><iphau/pipwsa.htm>
<5><Workstation adapter console><iphau/wscip01.htm>
<4><AIX fast path MAP><iphau/aixfastpath.htm>
<4><Linux fast path MAP><iphau/linuxfastpath.htm>
<4><HMC isolation procedures><iphau/hmcisolationproc.htm>
<4><Using failing item codes><iphau/failingitems.htm>
<4><Symbolic FRUs><iphau/fru.htm>
<4><Failing function codes (FFCs)><iphau/fail1.htm>
<5><Failing function code list><iphau/ffclist.htm>
<3><Resolving problems><iphau/resolving.htm>
<4><Finding part locations><iphau/locations.htm>
<5><Location codes><iphau/loccodes.htm>
<5><Model 510 and 9123-710><iphau/loc510.htm>
<5><Model 520><iphau/locsqsf2.htm>
<5><Model 550 and 9124-720><iphau/loc550.htm>
<5><Model 570><iphau/locsql4mlx.htm>
<5><Model 575><iphau/loc575.htm>
<5><Model 590 and 595><iphau/loc590.htm>
<5><5074, 8079-002, and 8093-002 expansion units><iphau/loc5074.htm>
<5><5079 expansion unit><iphau/loc5079.htm>
<5><0588 and 5088 expansion units><iphau/loc5088.htm>
<5><5094, 5294, and 8094-002 expansion units><iphau/loc5094.htm>
<5><0595 and 5095 expansion units><iphau/loc5095.htm>
<5><5791, 5794, and 7040-61D expansion units><iphau/loc5791.htm>
<5><7311-D10, 7311-D11, and 5790 expansion units><iphau/locd11.htm>
<5><7311-D20 expansion unit><iphau/locd20.htm>
<5><Integrated xSeries adapter (IXA) card><iphau/locixa.htm>
<5><OpenPower><iphau/lochv.htm>
<5><Addresses><iphau/addresses.htm>
<4><Part assembly diagrams><iphau/partassemblies.htm>
<5><Model 510 and 9123-710><iphau/pa510.htm>
<5><Model 520><iphau/pa520.htm>
<5><Model 550 and 9124-720><iphau/pa550.htm>
<5><Model 570><iphau/pa570.htm>
<5><Model 575><iphau/pa575.htm>
<5><Model 590, 595, and 5792 rack><iphau/pa590.htm>
<5><0588, 5079, 5088, and 5294 expansion units><iphau/pafinal5088.htm>
<5><5074 and 5094 expansion units><iphau/pafinal5074.htm>
<5><0595 and 5095 expansion units><iphau/pafinal5095.htm>
<5><5791 and 5794><iphau/pa5791.htm>
<5><7311-D11 and 5790 expansion units><iphau/pad11.htm>
<5><7311-D20 expansion unit><iphau/pad20.htm>
<5><7014 rack><iphau/pa7014.htm>
<5><OpenPower><iphau/pahv.htm>
<4><Part number catalog><iphau/partnumbers.htm>
<5><System parts><iphau/partssystem.htm>
<5><Cables><iphau/partscables.htm>
<5><Miscellaneous parts><iphau/partsmisc.htm>
<5><HMC parts><iphau/partshmc.htm>
<4><Removing and replacing parts><iphau/removereplace.htm>
<5><Model 510 and 7123-710><iphau/rr510.htm>
<5><Model 520><iphau/rrsqsf2.htm>
<5><Model 550 and 9124-720><iphau/rr550.htm>
<5><Model 570><iphau/rrsql4mlx.htm>
<5><Model 575><iphau/rr575.htm>
<5><Model 590 and 595><iphau/rr590.htm>
<5><5074, 5079, 8079-002, and 8093-002 expansion units><iphau/rr50745079.htm>
<5><0588 and 5088 expansion units><iphau/rr5088.htm>
<5><5094, 5294, and 8094-002 expansion units><iphau/rr5094.htm>
<5><0595 and 5095 expansion units><iphau/rr5095.htm>
<5><5791, 5794, and 7040-61D expansion units><iphau/rr5791.htm>
<5><7311-D11 and 5790 expansion units><iphau/rrd11.htm>
<5><7311-D20 expansion unit><iphau/rrd20.htm>
<5><RIO/HSL cables><iphau/rrhslriocables.htm>
<5><Type 2748, 2757, 2763, 2778, 2780, 2782, 4758, 4764, 5703 cards><iphau/rrcards.htm>
<6><Replacing the cache battery pack><iphau/rrcachebatpack.htm>
<6><Replacing the cache directory card><iphau/rrcachedircard.htm>
<6><Replacing the battery on a type 4758 card><iphau/rr4758battery.htm>
<6><Disabling the cryptographic coprocessor on a type 4758 card><iphau/rr4758crypto.htm>
<6><Replacing the battery on a type 4764 card><iphau/rr4764battery.htm>
<6><Disabling the cryptographic coprocessor on a type 4764 card><iphau/rr4764crypto.htm>
<5><OpenPower><iphau/rrhv.htm>
<3><Verifying the repair><iphau/verifying.htm>
<4><Verifying the repair from the HMC><iphau/endcall.htm>
<4><Verifying the repair for i5/OS><iphau/verifyingos400.htm>
<4><Verifying the repair for AIX and Linux><iphau/verifyingaix.htm>
<3><Reference information><iphau/referenceinfo.htm>
<4><i5/OS data recovery information><iphau/os400recovery.htm>
<5><Disk unit recovery procedures><iphau/recovdisk.htm>
<6><Starting disk service><iphau/recovdiskstart.htm>
<6><Exchanging a disk unit with a device parity protection><iphau/recovdiskdpp.htm>
<6><Exchanging a disk unit with mirrored protection><iphau/recovdiskmir.htm>
<6><Resuming mirrored protection><iphau/recovdiskrmp.htm>
<6><Saving data and initializing the disk unit><iphau/recovdiskinit.htm>
<6><Initializing the disk unit and copying to disk><iphau/recovdiskcopy.htm>
<6><Copy the contents of the LIC log><iphau/recovdiskdst.htm>
<5><SRC address formats><iphau/refcodeformats.htm>
<5><Storage I/O card modes and jumpers><iphau/jumpers.htm>
<6><Setting or changing the mode of an I/O card><iphau/jumpset.htm>
<6><Mode jumper has been overridden><iphau/jumpoverridden.htm>
<6><Mode jumper is missing><iphau/jumpmissing.htm>
<5><Logical partitions><iphau/lpar.htm>
<6><Determining if the system has logical partitions><iphau/lpardetermine.htm>
<6><Determining if the system has guest partitions><iphau/lparguest.htm>
<6><Determining the release level of a guest partition><iphau/lparguestrelease.htm>
<6><Determining the hosting partition of a guest partition><iphau/lparguesthost.htm>
<5><Load-source disks and alternate IPL devices><iphau/loadsrcdisks.htm>
<6><Finding the load-source disk on systems without mirrored protection><iphau/loadsrcnonmir.htm>
<6><Finding the load-source disk on systems with mirrored protection><iphau/loadsrcmir.htm>
<6><Alternate IPL device><iphau/loadsrcaltipl.htm>
<5><Reclaiming IOP cache storage><iphau/reclaimiop.htm>
<4><Working with AIX diagnostics><iphau/working01.htm>
<5><General AIX diagnostic information><iphau/gen01.htm>
<5><Loading the AIX online or the eserver standalone diagnostics><iphau/aixdiagnostics.htm>
<5><AIX tasks and service aids><iphau/aixserviceaids.htm>
<4><Powering on and powering off><iphau/onoff.htm>
<5><Powering off an expansion unit><iphau/offexpansion.htm>
<5><Using the control panel power button to power off><iphau/offpanelbutton.htm>
<4><HMC maintenance><iphau/hmcreference.htm>
<5><HMC diagnostics overview><iphau/hmcdiagoverview.htm>
<5><Viewing the HMC console logs><iphau/viewhmclogs.htm>
<4><Service functions><iphau/sfun.htm>
<5><Dedicated service tools (DST)><iphau/dst.htm>
<6><System paging environments><iphau/page.htm>
<7><Stand-alone paging (non-paging)><iphau/pagealone.htm>
<7><Limited paging><iphau/pagelimited.htm>
<7><Full paging><iphau/pagefull.htm>
<6><Accessing DST><iphau/hadst.htm>
<7><Performing an IPL to DST><iphau/xidst.htm>
<7><Changing a service tools user ID><iphau/chgstid.htm>
<7><Resetting the QSECOFR service tools user ID><iphau/resetqsecofr.htm>
<7><Performing an IPL to DST for secondary partitions><iphau/iplsp.htm>
<7><Pressing the system request key while the system is operational><iphau/req.htm>
<7><Selecting Function 21 while the system is operational><iphau/x21.htm>
<7><Performing an alternate IPL to DST><iphau/altdst.htm>
<6><Function keys in DST><iphau/fkeys.htm>
<6><Exiting DST><iphau/end.htm>
<6><DST options><iphau/dstmf.htm>
<7><Installing LIC><iphau/dstopilic.htm>
<7><Installing the operating system><iphau/dstopios.htm>
<7><Perform an IPL><iphau/pipl.htm>
<7><Work with LIC><iphau/ll.htm>
<7><Work with disk units><iphau/wdskdst.htm>
<8><Work with disk configuration><iphau/dskcf.htm>
<8><Display disk configuration><iphau/disdc.htm>
<8><Work with ASP threshold><iphau/aspt.htm>
<8><Work with ASP configuration><iphau/aspc.htm>
<8><Work with mirrored protection><iphau/mirr.htm>
<8><Work with device parity protection><iphau/devpa.htm>
<8><Work with disk compression><iphau/dskcomp.htm>
<8><Work with disk unit recovery><iphau/dskrec.htm>
<8><Disk unit problem recovery procedures><iphau/dupr.htm>
<7><Work with DST environment><iphau/contenv.htm>
<8><Work with active service tools><iphau/wactst.htm>
<8><Work with system devices><iphau/outprt.htm>
<8><Work with service tools user IDs><iphau/chgdst.htm>
<8><Work with system values><iphau/wwval.htm>
<8><Work with alternate installation device><iphau/dstbootload.htm>
<7><Select DST console mode><iphau/wwserv.htm>
<7><Start a service tool><iphau/dstool.htm>
<8><Display/Alter/Dump><iphau/dad.htm>
<8><Licensed internal code log><iphau/licl.htm>
<8><Licensed internal code trace><iphau/tlic.htm>
<8><Hardware service manager><iphau/hsman.htm>
<8><Main storage dump manager><iphau/msdm.htm>
<8><Product activity log (PAL)><iphau/pro.htm>
<8><Operator panel functions><iphau/oppanfun.htm>
<8><Performance data collector><iphau/perfdata.htm>
<8><Work with communications trace><iphau/wwct.htm>
<7><Perform automatic installation of the operating system><iphau/osautoinstall.htm>
<7><Save Licensed Internal Code (LIC)><iphau/savelic.htm>
<7><Work with save storage and restore storage><iphau/srstorage.htm>
<7><Work with remote service support><iphau/rdst.htm>
<8><Allowing access for remote service support><iphau/edst.htm>
<8><Activating remote service support><iphau/adst.htm>
<7><Work with system partitions><iphau/wrksysop.htm>
<7><Work with system capacity><iphau/wwcapacity.htm>
<7><Work with system security><iphau/wwsecurity.htm>
<7><End batch restricted state><iphau/endbatchrest.htm>
<5><Hardware service manager><iphau/hsm.htm>
<6><HSM options><iphau/hsmenu.htm>
<7><Packaging hardware resources><iphau/phr.htm>
<7><Logical hardware resources><iphau/lhr.htm>
<7><Locate resource by name><iphau/lr.htm>
<7><Failed and non-reporting resources><iphau/fai.htm>
<7><System Power Control Network (SPCN)><iphau/spcnh.htm>
<7><Work with service action log><iphau/gap.htm>
<7><Display label location work sheet><iphau/lloca.htm>
<7><Device concurrent maintenance><iphau/cncmnt.htm>
<6><Collecting information and performing functions from the HSM displays><iphau/keys.htm>
<7><Change resource details><iphau/cdet.htm>
<7><Concurrent maintenance><iphau/hsmconc.htm>
<7><Create frame information><iphau/crtf.htm>
<7><Debug the resource><iphau/dbug.htm>
<7><Display address><iphau/addrss.htm>
<7><Display associated resources><iphau/assoc.htm>
<7><Display card gap information><iphau/dispcardgap.htm>
<7><Display failed resources><iphau/dfai.htm>
<7><Display hardware contained within package><iphau/dispconthw.htm>
<7><Display location information><iphau/displocinfo.htm>
<7><Display non-reporting resources><iphau/dnonh.htm>
<7><Display resources associated with IOP><iphau/drai.htm>
<7><Display resource details><iphau/disprdetails.htm>
<7><Display resources requiring attention><iphau/requ.htm>
<7><Display resource status><iphau/stat.htm>
<7><Display serial/part numbers, logical address, and status/resource name information><iphau/dseri.htm>
<7><Display system bus resources><iphau/sbr.htm>
<7><Display system information><iphau/dspsysinfo.htm>
<7><Display unresolved locations><iphau/hsmun.htm>
<7><Print><iphau/rprt.htm>
<7><Refresh the display><iphau/refreshdsp.htm>
<7><Remove non-reporting resource info><iphau/hsmrem.htm>
<7><Reserve frame space><iphau/rfs.htm>
<7><Using high-speed link (HSL) specific options><iphau/hsloptions.htm>
<8><Display detail><iphau/hsldspdetail.htm>
<8><Display system information><iphau/dispsysinfo.htm>
<8><Display port information><iphau/dspportinfo.htm>
<8><Resources associated with loop><iphau/resassocloop.htm>
<7><Verify resources><iphau/vfyr.htm>
<6><Symbols on the HSM displays><iphau/indic.htm>
<6><Printing the system configuration list><iphau/pscl.htm>
<6><Verification procedures><iphau/vpro.htm>
<7><Hardware service manager - verify><iphau/hsmverify.htm>
<7><Verify optical storage unit><iphau/vfycd.htm>
<7><Verify tape><iphau/vfytap.htm>
<7><Verify communications><iphau/vfycmn.htm>
<5><Product activity log (PAL)><iphau/pal.htm>
<6><The Service Action Log (SAL)><iphau/sal.htm>
<6><PAL location><iphau/palloc.htm>
<6><Recovering from PAL errors while in DST><iphau/palrecov.htm>
<6><Paging environment><iphau/vdst.htm>
<6><Options and function keys><iphau/palop.htm>
<7><Analyze log><iphau/analyzelog.htm>
<7><Display or print by log ID><iphau/dspprtid.htm>
<7><Change PAL sizes><iphau/chgpalsizes.htm>
<7><Work with removable media lifetime statistics><iphau/intv.htm>
<7><Display or print removable media session statistics><iphau/dspprtstats.htm>
<7><Reference code description><iphau/refcodedesc.htm>
<7><Sort by... function><iphau/sortb.htm>
<7><Address information function><iphau/addin.htm>
<7><View description><iphau/viewdescfun.htm>
<7><Hexadecimal PAL data><iphau/hexdta.htm>
<6><Interpreting PAL reports><iphau/hiwelr.htm>
<7><Some considerations when interpreting PAL reports><iphau/palconsider.htm>
<7><Resource name><iphau/rn.htm>
<7><Resource type, model, and location><iphau/restml.htm>
<7><Class><iphau/class.htm>
<7><System reference code><iphau/srefcode.htm>
<7><Multiple SRC entries><iphau/multisrc.htm>
<7><Logical address format><iphau/la.htm>
<7><Sequence number><iphau/seqnum.htm>
<7><Secondary code><iphau/secondcode.htm>
<7><Table ID><iphau/tabid.htm>
<7><IPL source/state><iphau/iplss.htm>
<7><Hexadecimal reports><iphau/hexr.htm>
<8><More information from hexadecimal reports><iphau/diplpaliop.htm>
<5><Service reference procedures><iphau/srp.htm>
<6><Setting the system date and time><iphau/sdt.htm>
<6><Determining the dominant operating system><iphau/oprun.htm>
<6><System password><iphau/stpas.htm>
<6><System unique identifier><iphau/suid.htm>
<6><Determining a primary or alternate console><iphau/dpac.htm>
<6><Locating the system's load source from the system console><iphau/lsysload.htm>
<6><History file><iphau/hl.htm>
<6><Low-level debug (LLD) and data collecting procedures><iphau/lld.htm>
<7><Displaying data for functions 63 and 64><iphau/lld54c.htm>
<6><Logical partitions><iphau/lparinfo.htm>
<7><Examples: Missing or non-reporting system bus resources><iphau/missresc.htm>
<7><Determining the release level of a logical partition><iphau/lpardrlp.htm>
<7><Locating a partition's console and load source><iphau/lparspc.htm>
<7><Querying logical partition time and date><iphau/ptdq.htm>
<7><Finding the SRC history list for a logical partition><iphau/lparsrchist.htm>
<7><Accessing the panel functions of a logical partition><iphau/lparppf.htm>
<7><Determining which logical partition owns a FRU or system I/O resource><iphau/lpardopsior.htm>
<7><Selecting IPL source and mode for a logical partition><iphau/lparipltypmod.htm>
<6><IASP/Clustering><iphau/cluster.htm>
<7><Determining if a tower is configured as switchable under OptiConnect><iphau/switchtwr.htm>
<7><Determining the power controlling and current logical system ownership of a tower><iphau/twrowner.htm>
<7><Determining the resource name and HSL loop number of an HSL I/O bridge><iphau/resnameprocedure.htm>
<7><Switching ownership of a tower's switchable resources><iphau/switchowner.htm>
<7><Switching the mode of a tower's switchable resources><iphau/switchmode.htm>
<5><Control panel functions><iphau/cpfu.htm>
<6><Values for IPL types, system operating modes, and speeds><iphau/iplvalues.htm>
<6><Ways to access the control panel><iphau/cpfcways.htm>
<6><Control panel function descriptions><iphau/cpfdc.htm>
<7><Primary control panel functions><iphau/normfunc.htm>
<7><Extended control panel functions><iphau/extfunc.htm>
<7><Low-level debug (LLD) panel functions><iphau/lldfunc.htm>
<5><System reference code (SRC) information><iphau/srci.htm>
<6><SRC formats><iphau/srcd2.htm>
<7><Word 1 - SRC general information><iphau/x11.htm>
<7><Word 2 - System status information><iphau/xf12.htm>
<8><Main storage dump indicator (M)><iphau/f12m.htm>
<8><IPL state indicator (I)><iphau/f12i.htm>
<8><IPL type last initiated indicator (G)><iphau/f12g.htm>
<6><System reference codes (SRCs)><iphau/systemrcs.htm>
<7><System reference codes (SRCs)><iphau/srcson.htm>
<8><SRC format description><iphau/srcformatdesc.htm>
<8><Hardware related SRC formats><iphau/vlcpsf.htm>
<8><Logical partition SRC descriptions and actions><iphau/lparurcs.htm>
<8><LIC detected PRC formats><iphau/fmt61.htm>
<7><LIC URC groups><iphau/vmcrc.htm>
<7><IPL status SRCs><iphau/iplsrc.htm>
<7><General status SRCs><iphau/gssrc.htm>
<5><Initial program load (IPL) information><iphau/iplin.htm>
<6><IPL type, mode, and speed options><iphau/idesct.htm>
<6><Methods to perform IPL><iphau/iplmethods.htm>
<6><Alternate installation IPL><iphau/bootload.htm>
<6><IPL sequence><iphau/iplsequence.htm>
<7><Service processor initialization><iphau/sp.htm>
<7><LIC initialization><iphau/hlic.htm>
<8><Log entries><iphau/logentries.htm>
<6><Status SRCs><iphau/ipls.htm>
<5><Licensed Internal Code (LIC)><iphau/lic.htm>
<6><Fixes and cumulative PTF packages><iphau/cum.htm>
<6><Displaying LIC fixes><iphau/ptfl.htm>
<6><Utilities to install and restore LIC><iphau/mir.htm>
<7><Utility to install LIC><iphau/mcl.htm>
<7><Utility to restore LIC><iphau/mcr.htm>
<6><Authorized Program Analysis Report (APAR)><iphau/aparmtr.htm>
<5><System architecture and configuration><iphau/ossf.htm>
<6><System power overview><iphau/spwo.htm>
<7><Power supply><iphau/pwrsup.htm>
<7><Battery power unit><iphau/xbpu.htm>
<7><System Power Control Network (SPCN)><iphau/spcn.htm>
<7><SPCN menu flow><iphau/spcn9.htm>
<8><Fields on the SPCN display><iphau/spcnfields.htm>
<8><Display detail option><iphau/ddr.htm>
<9><Fields on the Display Detail for Frame display><iphau/detframe.htm>
<9><Fields on the Display Detail for Unit display><iphau/detunit.htm>
<6><High speed link><iphau/hsl.htm>
<6><Multi-adapter bridge><iphau/multiadapt.htm>
<6><Resource names><iphau/names.htm>
<6><Hardware configuration restrictions><iphau/rest.htm>
<6><Communications card, cable, and wrap connector reference><iphau/comccwc.htm>
<6><Communications signal voltage levels><iphau/comsigvolt.htm>
<5><Working with storage dumps><iphau/srpa.htm>
<6><Automatic main storage dump><iphau/amsd.htm>
<6><Performing a main storage dump to disk (manual MSD)><iphau/msdtd.htm>
<6><Copying a main storage dump><iphau/copmsd.htm>
<7><Work with current main storage dump><iphau/wwcurdump.htm>
<7><Work with copies of main storage dumps><iphau/wwdumpcopies.htm>
<6><Main storage dump status><iphau/msds.htm>
<6><Error recovery for dumps><iphau/erp.htm>
<6><Performing a service processor storage dump><iphau/spdump_condor.htm>
<6><Copying the IOP storage dump to removable media><iphau/copydtd.htm>
<6><Performing an IOP dump using HSM (all models)><iphau/duhsm.htm>
<6><IOP dump information in the PAL (all models)><iphau/dupal.htm>
<5><i5/OS operating system><iphau/os.htm>
<6><DST in i5/OS full paging environment><iphau/dsto.htm>
<6><DST in i5/OS limited paging environment><iphau/dstol.htm>
<6><System Service Tools (SST)><iphau/ssto.htm>
<7><Accessing SST><iphau/hasst.htm>
<7><SST options><iphau/sstmf.htm>
<8><Start a service tool><iphau/starttool.htm>
<8><Work with active service tools><iphau/wwactive.htm>
<8><Work with disk units><iphau/wwdsku.htm>
<8><Work with diskette data recovery><iphau/wwdd.htm>
<9><Processing restrictions><iphau/wwddprest.htm>
<9><Alter diskette data><iphau/add.htm>
<9><Read data from diskette><iphau/drd.htm>
<9><Write data to diskette><iphau/dwd.htm>
<9><Display diskette data><iphau/ddd.htm>
<9><Print reports><iphau/pdd.htm>
<9><How to use the Work with Diskette Data Recovery option><iphau/ddrhow.htm>
<8><Work with system partitions><iphau/wwsyspart.htm>
<8><Work with system capacity><iphau/wwscap.htm>
<8><Work with system security><iphau/wwssec.htm>
<8><Work with service tools user IDs><iphau/wwstid.htm>
<7><SST function keys><iphau/sstfunk.htm>
<6><Online problem analysis and resolution><iphau/opar.htm>
<7><System-detected problems><iphau/sdp.htm>
<8><Problem log><iphau/plog.htm>
<8><Messages relating to hardware failures><iphau/mpt.htm>
<7><Customer-detected problems><iphau/cdp.htm>
<7><Service support facility><iphau/supfac.htm>
<6><Displaying i5/OS PTFs><iphau/ptfo.htm>
<6><i5/OS or LIC APAR information><iphau/aparos.htm>
<6><How to reset an I/O processor card while the system is up and running><iphau/riop.htm>
<6><Varying configuration descriptions on and off><iphau/uvary.htm>
<6><Commonly used i5/OS service commands><iphau/cusc.htm>
<7><Work with System Value (WRKSYSVAL) command><iphau/xsysval.htm>
<7><Service attributes (DSPSRVA or  CHGSRVA) commands><iphau/srvval.htm>
<8><ANZPRBAUTO><iphau/anzp.htm>
<8><CRITMSGUSR><iphau/critmsgusr.htm>
<8><RPTPRBAUTO><iphau/rptprb.htm>
<8><RPTSRVPVD><iphau/srvpvd.htm>
<8><SNDDTAPKT><iphau/snddtapkt.htm>
<8><PTFINSTYP><iphau/ptfinst.htm>
<7><Change Transmit Level (CHGXMTLVL) command><iphau/chgxl.htm>
<7><Work with Hardware Products (WRKHDWPRD) command><iphau/wrkhrd.htm>
<8><Using the configuration description label information to prepare for a system upgrade><iphau/before.htm>
<8><Using the configuration description label information after a system upgrade><iphau/after.htm>
<6><Verify commands><iphau/vfyc.htm>
<7><Verify communications><iphau/vfy.htm>
<8><Procedure><iphau/vfyproc.htm>
<8><Test descriptions><iphau/tede.htm>
<9><Remote modem test><iphau/rmodem.htm>
<9><Local modem test><iphau/lmodem.htm>
<9><Communications cable test><iphau/commcab.htm>
<9><Communications I/O adapter test><iphau/commio.htm>
<9><Communications I/O processor test><iphau/commiop.htm>
<9><Communications I/O processor memory test><iphau/commiopm.htm>
<9><Communications port A modem and coupler test><iphau/commporta.htm>
<9><External ring test><iphau/extring.htm>
<9><Communications/LAN link test><iphau/commlan.htm>
<9><Wireless network management utility><iphau/wire.htm>
<9><Wireless echo back test><iphau/web.htm>
<9><2620/2628 cryptographic processor card test><iphau/cpct.htm>
<9><2620/2628 cryptographic processor card wrap test><iphau/cpcwt.htm>
<9><2620/2628 external cryptographic hardware tests><iphau/echt.htm>
<9><LocalTalk interface test><iphau/lti.htm>
<6><Communications test><iphau/commt.htm>
<7><Wireless LAN adapter card indicators><iphau/indi.htm>
<7><Communications interface trace><iphau/cinttrace.htm>
<7><Concurrent LPDA-2 tests><iphau/lpda.htm>
<4><Using System Management Services (SMS)><iphau/usingsms.htm>
<4><Component and attention LEDs><iphau/compattentionleds.htm>
<4><Memory plugging for models 590 and 595><iphau/memrules590.htm>
<4><Setting expansion unit configuration ID and MTMS value><iphau/setconfigid.htm>
<4><System safety inspection><iphau/fmsi.htm>
<4><Forms><iphau/forms.htm>
<5><Problem reporting forms><iphau/fmpsf.htm>
<5><Work with electrostatic discharge-sensitive parts><iphau/fmesd.htm>
<5><Service log><iphau/fmsrvlog.htm>
<5><HSL loop configuration and status form><iphau/fmhslform.htm>
<5><Installed features in a PCI bridge set form><iphau/fmpciinstalled.htm>
<5><HSL cable location form><iphau/fmhslcableloctab.htm>
<3><Related information><iphau/related.htm>
# End of navigation data from: iphau/iphautoc.xml
# End of navigation data from: ipha5/ipha5toc.xml
<1><Verwante koppelingen><ichwrelated.htm>
<1><Woordenlijst><iphav/iphwglos.htm>
<1><Kennisgevingen><icfcc.htm>
# End of navigation data from: icnavsquadrons.xml
